Attributes
| Part Number | 4695-000000-000015 |
|---|
Description
# Chem Master™ Plus XLPE
RECOMMENDED FOR: Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross–linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open–end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection.
- CAUTION: For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744–5070. Chem Master™ Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however, the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744–5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning.
- For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744–5070.
- Additional color covers available on special order.
- Reference Gates Chemical Resistance Table for proper hose selection.
- Chem Master™ Plus XLPE CR contains a monofilament helix for suction and crush resistant capability, as well as for routing hoses through tight bends.
## Features and Benefits
- Tube: Type K (Gatron™ Modified Cross-linked Polyethylene).
- Reinforcement: Synthetic, high tensile textile cord with steel wire helix.
- Cover: Type P (EPDM). Black or green corrugated with orange stripe.
- Design factor : 4:1.
Variations (98)
1-1/2X100 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 1.5 |
| Hose Inside Diameter (mm) | 38.1 |
| Hose Outside Diameter (in) | 2.04 |
| Hose Outside Diameter (mm) | 51.8 |
| Inside Diameter (in) | 1.5 |
| Inside Diameter (mm) | 38.1 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.04 |
| Outside Diameter (mm) | 38.1 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.89 |
1-1/2X100 CHEM+ XLPE 200SD BLK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1.5 |
| Hose Inside Diameter (mm) | 38.1 |
| Hose Outside Diameter (in) | 2.04 |
| Hose Outside Diameter (mm) | 51.8 |
| Inside Diameter (in) | 1.5 |
| Inside Diameter (mm) | 38.1 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.04 |
| Outside Diameter (mm) | 38.1 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.87 |
1-1/2X200 CHEM+ XLPE 200SD BLK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1.5 |
| Hose Inside Diameter (mm) | 38.1 |
| Hose Outside Diameter (in) | 2.04 |
| Hose Outside Diameter (mm) | 51.8 |
| Inside Diameter (in) | 1.5 |
| Inside Diameter (mm) | 38.1 |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.04 |
| Outside Diameter (mm) | 38.1 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.7 |
1-1/4X100 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 1.25 |
| Hose Inside Diameter (mm) | 31.8 |
| Hose Outside Diameter (in) | 1.79 |
| Hose Outside Diameter (mm) | 45.5 |
| Inside Diameter (in) | 1.25 |
| Inside Diameter (mm) | 31.8 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.79 |
| Outside Diameter (mm) | 31.8 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.77 |
1-1/4X100 CHEM+XLPE 200SD BLK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1.25 |
| Hose Inside Diameter (mm) | 31.8 |
| Hose Outside Diameter (in) | 1.75 |
| Hose Outside Diameter (mm) | 44.5 |
| Inside Diameter (in) | 1.25 |
| Inside Diameter (mm) | 31.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.75 |
| Outside Diameter (mm) | 31.8 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.7 |
1-1/4X200 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 1.25 |
| Hose Inside Diameter (mm) | 31.8 |
| Hose Outside Diameter (in) | 1.79 |
| Hose Outside Diameter (mm) | 45.5 |
| Inside Diameter (in) | 1.25 |
| Inside Diameter (mm) | 31.8 |
| Working Pressure (psi) | 150 |
| Length (m) | 61 |
| Outside Diameter (in) | 1.79 |
| Outside Diameter (mm) | 31.8 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 0.77 |
1X100 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 89 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.52 |
| Hose Outside Diameter (mm) | 38.6 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.52 |
| Outside Diameter (mm) | 25.4 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.61 |
1X100 CHEM XTREME FEP 200SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.56 |
| Hose Outside Diameter (mm) | 39.6 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.56 |
| Outside Diameter (mm) | 25.4 |
| Thickness (in) | 0.28 |
| Thickness (mm) | 7.1 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.63 |
1X100 CHEM+ CPE 200SD MEGAFLEX
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +275°F |
| Minimum Bend Radius (in) | 2 |
| Minimum Bend Radius (mm) | 51 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.46 |
| Hose Outside Diameter (mm) | 37.1 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.46 |
| Outside Diameter (mm) | 25.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus CPE MegaFlex® contains a wire helix for full suction capability, as well as for routing hoses through extremely tight bend radius applications. |
| Caution | Chem Master® Plus CPE MegaFlex® is designed to withstand fluid temperatures to 275°F (135° C), however, the rating is dependent upon the specific chemical being conveyed. Contact Denver Product Application (303-744-5070) for any chemical application above 125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.51 |
1X100 CHEM+ XLPE 200SD BLACK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.5 |
| Hose Outside Diameter (mm) | 38.1 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.5 |
| Outside Diameter (mm) | 25.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.56 |
1X100 CHEM+ XLPE 200SD CR
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.61 |
| Hose Outside Diameter (mm) | 40.9 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.61 |
| Outside Diameter (mm) | 25.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Notes | NOTE: Also see Black Gold® Chemical Plus XLPE 250SD |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE CR contains a monofilament helix for suction and crush resistant capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE CR is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.56 |
1X20 CHEM XTREME FEP 200SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.56 |
| Hose Outside Diameter (mm) | 39.6 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 6.1 |
| Outside Diameter (in) | 1.56 |
| Outside Diameter (mm) | 25.4 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 20 |
| Weight (lbs.) | 0.63 |
16CH4001
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 2 |
| Minimum Bend Radius (mm) | 51 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Temperature Range | -40°F to +275°F (-40°C to +135°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 1.46 |
| Outside Diameter (mm) | 25.4 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Brown |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | CPE - Type J. Black. High Temperature Resistant |
1X200 CHEM MASTER PLUS CPE 200SD MEGAFLEX TL
No variation attributes.
1X200 CHEM XTREME FEP 200SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.56 |
| Hose Outside Diameter (mm) | 39.6 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 1.56 |
| Outside Diameter (mm) | 25.4 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 0.63 |
1X50 CHEM XTREME FEP 200SD CR
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.58 |
| Hose Outside Diameter (mm) | 40.1 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 200 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.58 |
| Outside Diameter (mm) | 25.4 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP CR has a monofilament helix for suction and crush resistant capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP CR is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP CR is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 50 |
| Weight (lbs.) | 0.63 |
2-1/2X100 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 2.5 |
| Hose Inside Diameter (mm) | 63.5 |
| Hose Outside Diameter (in) | 3.05 |
| Hose Outside Diameter (mm) | 77.5 |
| Inside Diameter (in) | 2.5 |
| Inside Diameter (mm) | 63.5 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.05 |
| Outside Diameter (mm) | 63.5 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.34 |
2-1/2X100 CHEM+ XLPE 150SD BLK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 2.5 |
| Hose Inside Diameter (mm) | 63.5 |
| Hose Outside Diameter (in) | 3.05 |
| Hose Outside Diameter (mm) | 77.5 |
| Inside Diameter (in) | 2.5 |
| Inside Diameter (mm) | 63.5 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.05 |
| Outside Diameter (mm) | 63.5 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 1.41 |
1 1/4X100 GRN CHEMMASTER PLUS XLPE 200
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Inside Diameter (in) | 1.25 |
| Inside Diameter (mm) | 31.8 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.75 |
| Outside Diameter (mm) | 31.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Green |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
1-1/2 X 200 MUSTANG RED
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Inside Diameter (in) | 1.50 |
| Inside Diameter (mm) | 38.1 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.04 |
| Outside Diameter (mm) | 38.1 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Red |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
2X100 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.54 |
| Hose Outside Diameter (mm) | 64.5 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.07 |
2X100 CHEM XTREME FEP 200SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.55 |
| Hose Outside Diameter (mm) | 64.8 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.55 |
| Outside Diameter (mm) | 50.8 |
| Thickness (in) | 0.28 |
| Thickness (mm) | 7 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.14 |
2X100 CHEM+ CPE 200SD MEGAFLEX
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +275°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.48 |
| Hose Outside Diameter (mm) | 63 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.48 |
| Outside Diameter (mm) | 50.8 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus CPE MegaFlex® contains a wire helix for full suction capability, as well as for routing hoses through extremely tight bend radius applications. |
| Caution | Chem Master® Plus CPE MegaFlex® is designed to withstand fluid temperatures to 275°F (135° C), however, the rating is dependent upon the specific chemical being conveyed. Contact Denver Product Application (303-744-5070) for any chemical application above 125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.01 |
2X100 CHEM+ XLPE 200SD BLK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Min. Burst Pressure (psi) | 1000 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.54 |
| Hose Outside Diameter (mm) | 64.5 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 1.08 |
2X100 CHEM+ XLPE 200SD CR
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.63 |
| Hose Outside Diameter (mm) | 66.8 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.63 |
| Outside Diameter (mm) | 50.8 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Notes | NOTE: Also see Black Gold® Chemical Plus XLPE 250SD |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE CR contains a monofilament helix for suction and crush resistant capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE CR is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 1.08 |
2X20 CHEM XTREME FEP 200SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.55 |
| Hose Outside Diameter (mm) | 64.8 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 6.1 |
| Outside Diameter (in) | 2.55 |
| Outside Diameter (mm) | 50.8 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 20 |
| Weight (lbs.) | 1.14 |
2X200 CHEM MASTER PLUS CPE 200SD MEGAFLEX TL
No variation attributes.
2X50 CHEM XTREME FEP 200SD CR
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.58 |
| Hose Outside Diameter (mm) | 65.5 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 200 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.58 |
| Outside Diameter (mm) | 50.8 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP CR has a monofilament helix for suction and crush resistant capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP CR is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP CR is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 50 |
| Weight (lbs.) | 1.17 |
3/4X100 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.27 |
| Hose Outside Diameter (mm) | 32.3 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.27 |
| Outside Diameter (mm) | 19.1 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.5 |
3/4X100 CHEM+ XLPE 200SD BLK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.25 |
| Hose Outside Diameter (mm) | 31.8 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.25 |
| Outside Diameter (mm) | 19.1 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.45 |
3/4X100 CHEM+CPE 200SD MEGAFLX
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +275°F |
| Minimum Bend Radius (in) | 2 |
| Minimum Bend Radius (mm) | 38 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.2 |
| Hose Outside Diameter (mm) | 30.5 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.2 |
| Outside Diameter (mm) | 19.1 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus CPE MegaFlex® contains a wire helix for full suction capability, as well as for routing hoses through extremely tight bend radius applications. |
| Caution | Chem Master® Plus CPE MegaFlex® is designed to withstand fluid temperatures to 275°F (135° C), however, the rating is dependent upon the specific chemical being conveyed. Contact Denver Product Application (303-744-5070) for any chemical application above 125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 0.41 |
3/4X20 CHEM XTREME FEP 200SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 800 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.29 |
| Hose Outside Diameter (mm) | 32.8 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 200 |
| Length (m) | 6.1 |
| Outside Diameter (in) | 1.29 |
| Outside Diameter (mm) | 19.1 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 20 |
| Weight (lbs.) | 0.52 |
2X200 CHEM MASTER PLUS CPE 200SD MEGAFLEX
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +275°F (-40°C to +135°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.48 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Brown |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | CPE - Type J. Black. High Temperature Resistant |
3X100 CHEM XTREME FEP 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.59 |
| Hose Outside Diameter (mm) | 91.2 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.59 |
| Outside Diameter (mm) | 76.2 |
| Thickness (in) | 0.3 |
| Thickness (mm) | 7.5 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.77 |
3X100 CHEM+ CPE 150SD MEGAFLEX
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +275°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.48 |
| Hose Outside Diameter (mm) | 88.4 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.48 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus CPE MegaFlex® contains a wire helix for full suction capability, as well as for routing hoses through extremely tight bend radius applications. |
| Caution | Chem Master® Plus CPE MegaFlex® is designed to withstand fluid temperatures to 275°F (135° C), however, the rating is dependent upon the specific chemical being conveyed. Contact Denver Product Application (303-744-5070) for any chemical application above 125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.61 |
3X100 CHEM+ XLPE 150SD BLACK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.58 |
| Hose Outside Diameter (mm) | 90.9 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 1.81 |
3X200 CHEM EPDM 150SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 11 |
| Minimum Bend Radius (mm) | 279 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.6 |
| Hose Outside Diameter (mm) | 91.4 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 150 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.6 |
| Outside Diameter (mm) | 76.2 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 1.7 |
4X100 CHEM EPDM 125SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 16 |
| Minimum Bend Radius (mm) | 406 |
| Min. Burst Pressure (psi) | 500 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.6 |
| Hose Outside Diameter (mm) | 116.8 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 125 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 4.6 |
| Outside Diameter (mm) | 101.6 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 2.25 |
4X100 CHEM+ CPE 150SD MEGAFLEX
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +275°F |
| Minimum Bend Radius (in) | 10 |
| Minimum Bend Radius (mm) | 254 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.49 |
| Hose Outside Diameter (mm) | 114 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 4.49 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus CPE MegaFlex® contains a wire helix for full suction capability, as well as for routing hoses through extremely tight bend radius applications. |
| Caution | Chem Master® Plus CPE MegaFlex® is designed to withstand fluid temperatures to 275°F (135° C), however, the rating is dependent upon the specific chemical being conveyed. Contact Denver Product Application (303-744-5070) for any chemical application above 125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 2.08 |
4X100 CHEM+ XLPE 150SD BLACK
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 24 |
| Minimum Bend Radius (mm) | 610 |
| Min. Burst Pressure (psi) | 600 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.69 |
| Hose Outside Diameter (mm) | 119.1 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 4.69 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning. |
| Customer Pack | 100 |
| Weight (lbs.) | 2.72 |
4X20 CHEM XTREME FEP 125SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +300°F |
| Minimum Bend Radius (in) | 24 |
| Minimum Bend Radius (mm) | 610 |
| Min. Burst Pressure (psi) | 500 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.66 |
| Hose Outside Diameter (mm) | 118.4 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 125 |
| Length (m) | 6.1 |
| Outside Diameter (in) | 4.66 |
| Outside Diameter (mm) | 101.6 |
| Color | Blue |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Fluoroethylenepropylene (FEP) - Type T. High chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets FDA requirements. |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 20 |
| Weight (lbs.) | 2.6 |
6X100 CHEM EPDM 125SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F |
| Minimum Bend Radius (in) | 24 |
| Minimum Bend Radius (mm) | 610 |
| Min. Burst Pressure (psi) | 500 |
| Hose Inside Diameter (in). | 6 |
| Hose Inside Diameter (mm) | 152.4 |
| Hose Outside Diameter (in) | 6.78 |
| Hose Outside Diameter (mm) | 172.2 |
| Inside Diameter (in) | 6 |
| Inside Diameter (mm) | 152.4 |
| Working Pressure (psi) | 125 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 6.78 |
| Outside Diameter (mm) | 152.4 |
| Color | Yellow |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 5.29 |
1 1/4X100 MUSTANG BLK
No variation attributes.
12CH4101
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.25 |
| Outside Diameter (mm) | 19.1 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Yellow |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
16CH4102
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.50 |
| Outside Diameter (mm) | 25.4 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Blue |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
16CH4104
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.50 |
| Outside Diameter (mm) | 25.4 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Red |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
16CH4105
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.50 |
| Outside Diameter (mm) | 25.4 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Yellow |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
24CH4103
| Vacuum (In. Hg) | 20 |
|---|---|
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Inside Diameter (in) | 1.50 |
| Inside Diameter (mm) | 38.1 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.13 |
| Outside Diameter (mm) | 38.1 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Blue |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
24CH4106
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Inside Diameter (in) | 1.50 |
| Inside Diameter (mm) | 38.1 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.04 |
| Outside Diameter (mm) | 38.1 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Yellow |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
24CH4141
| Vacuum (In. Hg) | 20 |
|---|---|
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Inside Diameter (in) | 1.50 |
| Inside Diameter (mm) | 38.1 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.13 |
| Outside Diameter (mm) | 38.1 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Green |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
32CH4102
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Blue |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
32CH4103
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Blue |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
32CH4105
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Green |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
32CH4107
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Red |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
32CH4108
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 9 |
| Minimum Bend Radius (mm) | 229 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 200 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.54 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Yellow |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
40CH4103
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Inside Diameter (in) | 2.50 |
| Inside Diameter (mm) | 63.5 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.05 |
| Outside Diameter (mm) | 63.5 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Green |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
48CH4102
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Blue |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
48CH4103
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Blue |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
48CH4104
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Gray |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
48CH4106
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Green |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
48CH4108
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Red |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
48CH4109
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.58 |
| Outside Diameter (mm) | 76.2 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Yellow |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
64CH4102
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 24 |
| Minimum Bend Radius (mm) | 610 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C) |
| Working Pressure (psi) | 150 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 4.69 |
| Outside Diameter (mm) | 101.6 |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Color | Green |
| Cover | EPDM - Type P. Corrugated. |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
469600166
No variation attributes.
46950697
No variation attributes.
46950696
No variation attributes.
46950196
No variation attributes.
469506097
No variation attributes.
46950732
No variation attributes.
469502857
No variation attributes.
469500066
No variation attributes.
469500056
No variation attributes.
469506077
No variation attributes.
46950630
No variation attributes.
469500527
No variation attributes.
469506847
No variation attributes.
46950951
No variation attributes.
469500036
No variation attributes.
469502116
No variation attributes.
469506967
No variation attributes.
469500076
No variation attributes.
469506286
No variation attributes.
469508307
No variation attributes.
469600086
No variation attributes.
469502166
No variation attributes.
46950632
No variation attributes.
469502296
No variation attributes.
46950952
No variation attributes.
46950831
No variation attributes.
469507377
No variation attributes.
469600156
No variation attributes.
469500086
No variation attributes.
469500016
No variation attributes.
469506287
No variation attributes.
469502677
No variation attributes.
469600246
No variation attributes.
46950631
No variation attributes.
469500026
No variation attributes.
Specifications
| Vacuum (In. Hg) | 20 – 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +250°F, -40°F to +300°F, -40°F to +275°F |
| Minimum Bend Radius (in) | 2 – 24 |
| Minimum Bend Radius (mm) | 38 – 610 |
| Min. Burst Pressure (psi) | 500 – 1000 |
| Hose Inside Diameter (in). | 0.75 – 6 |
| Hose Inside Diameter (mm) | 19.1 – 152.4 |
| Hose Outside Diameter (in) | 1.2 – 6.78 |
| Hose Outside Diameter (mm) | 30.5 – 172.2 |
| Inside Diameter (in) | 0.75 – 6 |
| Inside Diameter (mm) | 19.1 – 152.4 |
| Working Pressure (psi) | 125 – 200 |
| Length (m) | 6.1 – 61 |
| Outside Diameter (in) | 1.2 – 6.78 |
| Outside Diameter (mm) | 19.1 – 152.4 |
| Color | Yellow, Black, Blue, Brown, Green, Red, +1 more |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | EPDM - Type P. Mild chemical resistance., Gatron Modified Cross-linked Polyethylene - Type K. Chemical Resistant., Fluoroethylenepropylene (FEP) - Type T. High chemical resistance., CPE - Type J. High Temperature Resistant. |
| Construction: Cover | EPDM - Type P |
| Recommended For | Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Chem Master® EPDM contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand +250°F (+121°C) applications. Reference Gates Chemical Resistance Table for proper hose selection., Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection., Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP has a wire helix for full suction capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100., Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus CPE MegaFlex® contains a wire helix for full suction capability, as well as for routing hoses through extremely tight bend radius applications., Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® Plus XLPE CR contains a monofilament helix for suction and crush resistant capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is 'best in class' for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with 'open-end' 50 PSI steam or in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection., Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Chem Master® XTreme™ FEP CR has a monofilament helix for suction and crush resistant capability. The tube stock Fluoroethylenepropylene (FEP) has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Chem Master® XTreme™ FEP CR is designed for easy cleaning in a bath containing 10% (NaOH) @ +212°F (+100°C). Cleaning in place (CIP) methods may be used. Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100. |
| Caution | Chem Master® EPDM is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C)., For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning., Chem Master® XTreme™ FEP is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C)., Chem Master® Plus CPE MegaFlex® is designed to withstand fluid temperatures to 275°F (135° C), however, the rating is dependent upon the specific chemical being conveyed. Contact Denver Product Application (303-744-5070) for any chemical application above 125°F (+52°C)., For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. Chem Master® Plus XLPE CR is designed to withstand fluid temperatures to +250°F (+121°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). Not recommended for 'closed steam' cleaning., Chem Master® XTreme™ FEP CR is designed to withstand fluid temperatures to +300°F (+149°C); however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above +125°F (+52°C). |
| Customer Pack | 20 – 200 |
| Weight (lbs.) | 0.41 – 5.29 |
| Thickness (in) | 0.28 – 0.3 |
| Thickness (mm) | 7 – 7.5 |
| Standards | Meets FDA requirements. |
| Notes | NOTE: Also see Black Gold® Chemical Plus XLPE 250SD |
| Temperature Range | -40°F to +275°F (-40°C to +135°C), -40°F to +250°F (-40°C to +121°C) |
| Coupling Recommendation | 7 Combination Nipple. 8 Tri-Lokt. 49 Industrial Quick-Connecting. 71 Permanent Swaged or Crimped. 73 Permanent Swaged or Crimped. |
| Cover | EPDM - Type P. Corrugated., EPDM - Type P. Smooth. |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | CPE - Type J. Black. High Temperature Resistant, Gatron Modified Cross-linked Polyethylene - Type K. Tan. Chemical Resistant |
PDF Documents
No PDF documents.