Attributes
| Part Number | 4171-000000-000002 |
|---|
Description
Silicone Engine Coolant Hose RECOMMENDED FOR: Engine coolant hose to withstand temperature extremes. Also suitable for air or water. CAUTION: Not for conveying fuel and oil. Meets SAE 20R1 Class A, standard wall. Wall thickness is 4.95 +/– 0.65mm (0.195 +/– 0.25”) excluding lap area. Also suitable for air and water.
Happy Engine, Happy Vehicle. The performance of your engine relies on the performance of the cooling system, and more specifically, the coolant hose. Gates® designs, tests, and manufactures superior aftermarket cooling system solutions to ensure every replacement is an exact fit and services vehicles with equivalent or better performance, durability, and efficiency.
Cheers to a Long Life. The combination of a silicone cover and hose tube creates an extremely durable coolant transfer system that resists damaging exposure to underhood and coolant heat. Only Gates® innovative material composites and product constructions can give you the most strong and durable solutions on the market.
Variations (17)
1X10FT ENG COOL SILICONE 90
| Vacuum (In. Hg) | 7 |
|---|---|
| Continuous Operating Temperature Range | -65°F to +347°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Min. Burst Pressure (psi) | 375 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.39 |
| Hose Outside Diameter (mm) | 35.3 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 90 |
| Length (m) | 3 |
| Outside Diameter (in) | 1.39 |
| Outside Diameter (mm) | 25.4 |
| Color | Green |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | Silicone - Type MQ. Limited oil resistance. |
| Construction: Cover | Silicone - Type MQ |
| Standards | Meets requirements of SAE 20R1, Class A standard wall. |
| Standard Industry Specification | SAE 20R1 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Open-end water discharge and coolant connections on marine and stationary engines where extremely high and low temperature resistance is required. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.4 |
2X10 ENG COOL SILICONE 75
| Continuous Operating Temperature Range | -65°F to +347°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.39 |
| Hose Outside Diameter (mm) | 60.7 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 75 |
| Length (m) | 3 |
| Outside Diameter (in) | 2.39 |
| Outside Diameter (mm) | 50.8 |
| Color | Green |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | Silicone - Type MQ. Limited oil resistance. |
| Construction: Cover | Silicone - Type MQ |
| Standards | Meets requirements of SAE 20R1, Class A standard wall. |
| Standard Industry Specification | SAE 20R1 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Open-end water discharge and coolant connections on marine and stationary engines where extremely high and low temperature resistance is required. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.73 |
3X10 ENG COOL SILICONE 50
| Continuous Operating Temperature Range | -65°F to +347°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 200 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.39 |
| Hose Outside Diameter (mm) | 86.1 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 50 |
| Length (m) | 3 |
| Outside Diameter (in) | 3.39 |
| Outside Diameter (mm) | 76.2 |
| Color | Green |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | Silicone - Type MQ. Limited oil resistance. |
| Construction: Cover | Silicone - Type MQ |
| Standards | Meets requirements of SAE 20R1, Class A standard wall. |
| Standard Industry Specification | SAE 20R1 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Open-end water discharge and coolant connections on marine and stationary engines where extremely high and low temperature resistance is required. |
| Customer Pack | 10 |
| Weight (lbs.) | 1.17 |
4X10 ENG COOL SILICONE 35
| Continuous Operating Temperature Range | -65°F to +347°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 150 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.39 |
| Hose Outside Diameter (mm) | 111.5 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 35 |
| Length (m) | 3 |
| Outside Diameter (in) | 4.39 |
| Outside Diameter (mm) | 101.6 |
| Color | Green |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | Silicone - Type MQ. Limited oil resistance. |
| Construction: Cover | Silicone - Type MQ |
| Standards | Meets requirements of SAE 20R1, Class A standard wall. |
| Standard Industry Specification | SAE 20R1 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Open-end water discharge and coolant connections on marine and stationary engines where extremely high and low temperature resistance is required. |
| Customer Pack | 10 |
| Weight (lbs.) | 1.54 |
41710672
No variation attributes.
41710664
No variation attributes.
41710656
No variation attributes.
41710663
No variation attributes.
41710660
No variation attributes.
41710675
No variation attributes.
41710661
No variation attributes.
41710814
No variation attributes.
41710652
No variation attributes.
41710665
No variation attributes.
41710813
No variation attributes.
41710662
No variation attributes.
41710657
No variation attributes.
Specifications
| Vacuum (In. Hg) | 7 |
|---|---|
| Continuous Operating Temperature Range | -65°F to +347°F |
| Minimum Bend Radius (in) | 0 – 12 |
| Minimum Bend Radius (mm) | 0 – 305 |
| Min. Burst Pressure (psi) | 150 – 375 |
| Hose Inside Diameter (in). | 1 – 4 |
| Hose Inside Diameter (mm) | 25.4 – 101.6 |
| Hose Outside Diameter (in) | 1.39 – 4.39 |
| Hose Outside Diameter (mm) | 35.3 – 111.5 |
| Inside Diameter (in) | 1 – 4 |
| Inside Diameter (mm) | 25.4 – 101.6 |
| Working Pressure (psi) | 35 – 90 |
| Length (m) | 3 |
| Outside Diameter (in) | 1.39 – 4.39 |
| Outside Diameter (mm) | 25.4 – 101.6 |
| Color | Green |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | Silicone - Type MQ. Limited oil resistance. |
| Construction: Cover | Silicone - Type MQ |
| Standards | Meets requirements of SAE 20R1, Class A standard wall. |
| Standard Industry Specification | SAE 20R1 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Open-end water discharge and coolant connections on marine and stationary engines where extremely high and low temperature resistance is required. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.4 – 1.54 |
PDF Documents
No PDF documents.