Attributes
| Part Number | 4257-000000-000001 |
|---|
Description
Small I.D. Coolant Hose Gates Small Inside Diameter, or I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, and is approved for marine applications. Has all the quality features of Gates Molded Coolant Hose. Inside diameters range from 1/4" to 1". Temperature Range: -40°C to +135°C (-40°F to +275°F). EPDM tube, synthetic fiber knit reinforcement, EPDM cover. Engineered to resist electrochemical degradation - the leading cause of hose failure. Custom shapes available with minimum order quantity and setup charge. Note: Gates recommends replacing hose clamps each time a new coolant hose is installed. Meets SAE 20R3 EC Class D1.
As Engines Get Smaller, so do Gates® OE-Quality Aftermarket Parts. As today's engines increasingly demand smaller, lighter, stronger components, Gates® OE-exact and OE-quality vehicle engine components get ahead of these trends to innovate in the aftermarket. We factory-mold our small I.D. coolant hoses to exact manufacturer specifications, guaranteeing late model coverage for the vehicles of tomorrow.
Solving ECD, One hose at a time. When creating our molded coolant hose, we wanted to tackle the leading cause of hose failure: Electrochemical Degradation, or ECD, occurs when the hose, liquid coolant and engine/radiator fittings form a galvanic cell or "battery", which create a chemical reaction that causes micro-cracks to form in the hose tube. Coolant seeps into these cracks or striations and begins to break down the reinforcement, leading to hose failure and ultimately roadside breakdowns. We worked to engineer our EPDM coolant hose material compound with superior electrochemical resistance, so your Gates® coolant hoses will last longer and keep your engine systems running stronger.
Variations (1,269)
12156
| Centerline Length (in) | 22.73 |
|---|---|
| Centerline Length (mm) | 577 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12165
| Centerline Length (in) | 15.81 |
|---|---|
| Centerline Length (mm) | 402 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12176
| Centerline Length (in) | 21.25 |
|---|---|
| Centerline Length (mm) | 540 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12270
| Centerline Length (in) | 41.76 |
|---|---|
| Centerline Length (mm) | 1061 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12271
| Centerline Length (in) | 14.16 |
|---|---|
| Centerline Length (mm) | 360 |
| Inside Diameter 1 (in) | 1 |
| Inside Diameter 1 (mm) | 25 |
| Inside Diameter 2 (in) | 1 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Notes | Molded |
12272
| Centerline Length (in) | 20.2 |
|---|---|
| Centerline Length (mm) | 513 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12274
| Centerline Length (in) | 23.98 |
|---|---|
| Centerline Length (mm) | 609 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.8 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Notes | Molded |
12275
| Centerline Length (in) | 23.5 |
|---|---|
| Centerline Length (mm) | 597 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12276
| Centerline Length (in) | 9.43 |
|---|---|
| Centerline Length (mm) | 240 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12277
| Centerline Length (in) | 13.79 |
|---|---|
| Centerline Length (mm) | 350 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12278
| Centerline Length (in) | 15.62 |
|---|---|
| Centerline Length (mm) | 397 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12279
| Centerline Length (in) | 9.09 |
|---|---|
| Centerline Length (mm) | 260 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12283
| Centerline Length (in) | 6.41 |
|---|---|
| Centerline Length (mm) | 163 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12290
| Centerline Length (in) | 13.29 |
|---|---|
| Centerline Length (mm) | 338 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12291
| Centerline Length (in) | 7.61 |
|---|---|
| Centerline Length (mm) | 193 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Notes | Molded |
12292
| Centerline Length (in) | 18.68 |
|---|---|
| Centerline Length (mm) | 474 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12293
| Centerline Length (in) | 5.92 |
|---|---|
| Centerline Length (mm) | 150 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12294
| Centerline Length (in) | 8.16 |
|---|---|
| Centerline Length (mm) | 207 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12296
| Centerline Length (in) | 19.989999999999998 |
|---|---|
| Centerline Length (mm) | 508 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12297
| Centerline Length (in) | 6.94 |
|---|---|
| Centerline Length (mm) | 176 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12298
| Centerline Length (in) | 7.87 |
|---|---|
| Centerline Length (mm) | 200 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Steel |
| Notes | Molded |
12299
| Centerline Length (in) | 5.98 |
|---|---|
| Centerline Length (mm) | 152 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12301
| Centerline Length (in) | 6.98 |
|---|---|
| Centerline Length (mm) | 177 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12303
| Centerline Length (in) | 15.66 |
|---|---|
| Centerline Length (mm) | 398 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12304
| Centerline Length (in) | 19.43 |
|---|---|
| Centerline Length (mm) | 464 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12307
| Centerline Length (in) | 6.44 |
|---|---|
| Centerline Length (mm) | 164 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12308
| Centerline Length (in) | 12.11 |
|---|---|
| Centerline Length (mm) | 308 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12309
| Centerline Length (in) | 16.54 |
|---|---|
| Centerline Length (mm) | 420 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12310
| Centerline Length (in) | 16.64 |
|---|---|
| Centerline Length (mm) | 423 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12311
| Centerline Length (in) | 8.48 |
|---|---|
| Centerline Length (mm) | 215 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12313
| Centerline Length (in) | 13.11 |
|---|---|
| Centerline Length (mm) | 333 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12323
| Centerline Length (in) | 18.79 |
|---|---|
| Centerline Length (mm) | 477 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12332
| Centerline Length (in) | 13.23 |
|---|---|
| Centerline Length (mm) | 336 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12337
| Centerline Length (in) | 13.6 |
|---|---|
| Centerline Length (mm) | 345 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12338
| Centerline Length (in) | 7.62 |
|---|---|
| Centerline Length (mm) | 194 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12339
| Centerline Length (in) | 9.34 |
|---|---|
| Centerline Length (mm) | 237 |
| Inside Diameter 1 (in) | 0.27 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.27 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12342
| Centerline Length (in) | 15.11 |
|---|---|
| Centerline Length (mm) | 384 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12351
| Centerline Length (in) | 8.59 |
|---|---|
| Centerline Length (mm) | 218 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12353
| Centerline Length (in) | 19.559999999999999 |
|---|---|
| Centerline Length (mm) | 497 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12354
| Centerline Length (in) | 6.18 |
|---|---|
| Centerline Length (mm) | 157 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12355
| Centerline Length (in) | 10.47 |
|---|---|
| Centerline Length (mm) | 266 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12357
| Centerline Length (in) | 9.52 |
|---|---|
| Centerline Length (mm) | 242 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12358
| Centerline Length (in) | 9.09 |
|---|---|
| Centerline Length (mm) | 231 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12359
| Centerline Length (in) | 8.9 |
|---|---|
| Centerline Length (mm) | 226 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12363
| Centerline Length (in) | 11.49 |
|---|---|
| Centerline Length (mm) | 292 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12366
| Centerline Length (in) | 11.24 |
|---|---|
| Centerline Length (mm) | 285 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic, Steel |
| Notes | Molded |
12372
| Centerline Length (in) | 9.82 |
|---|---|
| Centerline Length (mm) | 249 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12374
| Centerline Length (in) | 13.79 |
|---|---|
| Centerline Length (mm) | 350 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12375
| Centerline Length (in) | 18.53 |
|---|---|
| Centerline Length (mm) | 471 |
| Inside Diameter 1 (in) | 0.81 |
| Inside Diameter 1 (mm) | 21 |
| Inside Diameter 2 (in) | 0.81 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
12377
| Centerline Length (in) | 8.39 |
|---|---|
| Centerline Length (mm) | 213 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12380
| Centerline Length (in) | 53.57 |
|---|---|
| Centerline Length (mm) | 1361 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
42572623
| Centerline Length (in) | 7.25 |
|---|---|
| Centerline Length (mm) | 184 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12258
| Centerline Length (in) | 25 |
|---|---|
| Centerline Length (mm) | 635 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
12475
| Centerline Length (in) | 17 |
|---|---|
| Centerline Length (mm) | 432 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12517
| Centerline Length (in) | 22 |
|---|---|
| Centerline Length (mm) | 559 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12529
| Centerline Length (in) | 9.5 |
|---|---|
| Centerline Length (mm) | 241 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12538
| Centerline Length (in) | 17.75 |
|---|---|
| Centerline Length (mm) | 451 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12015
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.23 |
| Centerline Length (mm) | 107 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1855 |
| Weight (lbs.) | 0.07 |
12020
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.7 |
| Centerline Length (mm) | 475 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 385 |
| Weight (lbs.) | 0.24 |
12025
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.44 |
| Centerline Length (mm) | 468 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.94 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.32 |
12039
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.22 |
| Centerline Length (mm) | 666 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.21 |
12042
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.29 |
| Centerline Length (mm) | 109 |
| Hose Inside Diameter (in). | 0.79 |
| Hose Inside Diameter (mm) | 20 |
| Inside Diameter 1 (in) | 0.79 |
| Inside Diameter 1 (mm) | 20 |
| Inside Diameter 2 (in) | 0.93 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3500 |
| Weight (lbs.) | 0.09 |
12043
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.86 |
| Centerline Length (mm) | 301 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.24 |
12044
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.27 |
| Centerline Length (mm) | 261 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 910 |
| Weight (lbs.) | 0.22 |
12045
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.04 |
| Centerline Length (mm) | 204 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.18 |
12047
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.61 |
| Centerline Length (mm) | 346 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.33 |
12048
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8 |
| Centerline Length (mm) | 203 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.22 |
12049
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.07 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.3 |
12052
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.06 |
| Centerline Length (mm) | 383 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.36 |
12053
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.2 |
| Centerline Length (mm) | 310 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.3 |
12057
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.98 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.33 |
12058
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.03 |
| Centerline Length (mm) | 509 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.3 |
12061
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.37 |
| Centerline Length (mm) | 517 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.34 |
12062
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.04 |
| Centerline Length (mm) | 306 |
| Hose Inside Diameter (in). | 0.66 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.66 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.22 |
12063
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.85 |
| Centerline Length (mm) | 250 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.08 |
12066
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.73 |
| Centerline Length (mm) | 476 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.49 |
12068
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.91 |
| Centerline Length (mm) | 150 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2800 |
| Weight (lbs.) | 0.06 |
12083
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.4 |
| Centerline Length (mm) | 417 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 140 |
| Weight (lbs.) | 0.3 |
12092
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.2 |
| Centerline Length (mm) | 361 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.33 |
12096
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.8 |
| Centerline Length (mm) | 249 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.22 |
12097
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.7 |
| Centerline Length (mm) | 297 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 840 |
| Weight (lbs.) | 0.24 |
12103
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.64 |
| Centerline Length (mm) | 575 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.46 |
12104
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.28 |
| Centerline Length (mm) | 617 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.58 |
12108
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.1 |
| Centerline Length (mm) | 663 |
| Hose Inside Diameter (in). | 0.31 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.16 |
12109
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.15 |
| Centerline Length (mm) | 436 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.38 |
12110
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.35 |
| Centerline Length (mm) | 517 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.44 |
12111
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.42 |
| Centerline Length (mm) | 392 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.275 |
12116
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.63 |
| Centerline Length (mm) | 397 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.275 |
12117
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.21 |
| Centerline Length (mm) | 488 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.16 |
12119
| Centerline Length (in) | 31.5 |
|---|---|
| Centerline Length (mm) | 800 |
| Inside Diameter 1 (in) | 0.35 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.27 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12120
| Centerline Length (in) | 21.625 |
|---|---|
| Centerline Length (mm) | 549 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Notes | Molded |
12121
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.96 |
| Centerline Length (mm) | 482 |
| Hose Inside Diameter (in). | 0.8 |
| Hose Inside Diameter (mm) | 20 |
| Inside Diameter 1 (in) | 0.8 |
| Inside Diameter 1 (mm) | 20 |
| Inside Diameter 2 (in) | 0.87 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.33 |
12123
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.58 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.32 |
12129
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.54 |
| Centerline Length (mm) | 344 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.71 |
12130
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.12 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.16 |
12136
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34 |
| Centerline Length (mm) | 864 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.75 |
12137
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.15 |
| Centerline Length (mm) | 232 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.0875 |
12138
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.2 |
12139
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.68 |
| Centerline Length (mm) | 220 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.16 |
12140
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.03 |
| Centerline Length (mm) | 255 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.2 |
12141
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.33 |
| Centerline Length (mm) | 161 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.84 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.13 |
12148
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.46 |
| Centerline Length (mm) | 240 |
| Hose Inside Diameter (in). | 0.95 |
| Hose Inside Diameter (mm) | 24 |
| Inside Diameter 1 (in) | 0.95 |
| Inside Diameter 1 (mm) | 24 |
| Inside Diameter 2 (in) | 0.95 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.22 |
12167
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.99 |
| Centerline Length (mm) | 508 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.45 |
12168
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.34 |
| Centerline Length (mm) | 491 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.46 |
12169
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.58 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
12170
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
12174
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.44 |
| Centerline Length (mm) | 595 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.26 |
12175
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.18 |
| Centerline Length (mm) | 640 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
12177
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.4 |
| Centerline Length (mm) | 721 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.49 |
12187
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.8 |
| Centerline Length (mm) | 935 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 210 |
| Weight (lbs.) | 0.68 |
12188
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.27 |
| Centerline Length (mm) | 108 |
| Hose Inside Diameter (in). | 1.12 |
| Hose Inside Diameter (mm) | 28 |
| Inside Diameter 1 (in) | 0.91 |
| Inside Diameter 1 (mm) | 23 |
| Inside Diameter 2 (in) | 1.12 |
| Inside Diameter 2 (mm) | 28 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.2 |
12189
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.19 |
| Centerline Length (mm) | 259 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.91 |
| Inside Diameter 2 (mm) | 23 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.1875 |
12203
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.26 |
| Centerline Length (mm) | 540 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.43 |
12209
| Centerline Length (in) | 37.4 |
|---|---|
| Centerline Length (mm) | 950 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12210
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.47 |
| Centerline Length (mm) | 368 |
| Inside Diameter 1 (in) | 0.52 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.52 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 150 |
| Weight (lbs.) | 0.09 |
12211
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.05 |
| Centerline Length (mm) | 408 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 700 |
| Weight (lbs.) | 0.275 |
12212
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.39 |
| Centerline Length (mm) | 416 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 140 |
| Weight (lbs.) | 0.35 |
12214
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.79 |
| Centerline Length (mm) | 833 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 70 |
| Weight (lbs.) | 0.64 |
12216
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.82 |
| Centerline Length (mm) | 478 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 525 |
| Weight (lbs.) | 0.41 |
12217
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.83 |
| Centerline Length (mm) | 504 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 350 |
| Weight (lbs.) | 0.43 |
12219
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.52 |
| Centerline Length (mm) | 470 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 350 |
| Weight (lbs.) | 0.41 |
12220
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.97 |
| Centerline Length (mm) | 406 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 490 |
| Weight (lbs.) | 0.36 |
12223
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.21 |
| Centerline Length (mm) | 463 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
12224
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.19 |
| Centerline Length (mm) | 386 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 70 |
| Weight (lbs.) | 0.34 |
12225
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.2 |
| Centerline Length (mm) | 361 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 875 |
| Weight (lbs.) | 0.31 |
12229
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.52 |
| Centerline Length (mm) | 369 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 350 |
| Weight (lbs.) | 0.32 |
12230
| Centerline Length (in) | 33.5 |
|---|---|
| Centerline Length (mm) | 851 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Notes | Molded |
12231
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.72 |
| Centerline Length (mm) | 729 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 280 |
| Weight (lbs.) | 0.57 |
12232
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.97 |
| Centerline Length (mm) | 660 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 350 |
| Weight (lbs.) | 0.52 |
12234
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.41 |
| Centerline Length (mm) | 544 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 350 |
| Weight (lbs.) | 0.44 |
12236
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.49 |
| Centerline Length (mm) | 698 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 525 |
| Weight (lbs.) | 0.55 |
12238
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.57 |
| Centerline Length (mm) | 395 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
12239
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.77 |
| Centerline Length (mm) | 477 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
12240
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.47 |
| Centerline Length (mm) | 393 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
12241
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.55 |
| Centerline Length (mm) | 471 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
12243
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.91 |
| Centerline Length (mm) | 379 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.34 |
12244
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.73 |
| Centerline Length (mm) | 501 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
12245
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.43 |
| Centerline Length (mm) | 341 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.31 |
12248
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.56 |
| Centerline Length (mm) | 319 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.29 |
12249
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.67 |
| Centerline Length (mm) | 347 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM, Plastic |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.31 |
12250
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.76 |
| Centerline Length (mm) | 350 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.32 |
12251
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.56 |
| Centerline Length (mm) | 548 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.44 |
12254
| Centerline Length (in) | 13.5 |
|---|---|
| Centerline Length (mm) | 343 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12255
| Centerline Length (in) | 10.88 |
|---|---|
| Centerline Length (mm) | 276 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12256
| Centerline Length (in) | 4.5 |
|---|---|
| Centerline Length (mm) | 114 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.53 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12259
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.77 |
| Centerline Length (mm) | 553 |
| Inside Diameter 1 (in) | 0.66 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.46 |
12260
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.26 |
| Centerline Length (mm) | 565 |
| Inside Diameter 1 (in) | 0.68 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.48 |
12263
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.03 |
| Centerline Length (mm) | 255 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.23 |
12264
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.44 |
| Centerline Length (mm) | 164 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.17 |
12265
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.58 |
| Centerline Length (mm) | 447 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.37 |
12265
| Centerline Length (in) | 17.579999999999998 |
|---|---|
| Centerline Length (mm) | 447 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12266
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.16 |
| Centerline Length (mm) | 791 |
| Inside Diameter 1 (in) | 1.84 |
| Inside Diameter 1 (mm) | 47 |
| Inside Diameter 2 (in) | 1.84 |
| Inside Diameter 2 (mm) | 47 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.62 |
12267
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.38 |
| Centerline Length (mm) | 695 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 999 |
| Weight (lbs.) | 0.55 |
12268
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.65 |
| Centerline Length (mm) | 372 |
| Inside Diameter 1 (in) | 0.69 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 350 |
| Weight (lbs.) | 0.33 |
12269
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.84 |
| Centerline Length (mm) | 402 |
| Inside Diameter 1 (in) | 0.69 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.69 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
| Customer Pack | 420 |
| Weight (lbs.) | 0.34 |
12295
| Centerline Length (in) | 20.74 |
|---|---|
| Centerline Length (mm) | 527 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12305
| Centerline Length (in) | 50 |
|---|---|
| Centerline Length (mm) | 1270 |
| Inside Diameter 1 (in) | 0.51 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.51 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12306
| Centerline Length (in) | 32.67 |
|---|---|
| Centerline Length (mm) | 830 |
| Inside Diameter 1 (in) | 0.47 |
| Inside Diameter 1 (mm) | 12 |
| Inside Diameter 2 (in) | 0.47 |
| Inside Diameter 2 (mm) | 12 |
| Material | EPDM |
| Notes | Molded |
12316
| Centerline Length (in) | 25 |
|---|---|
| Centerline Length (mm) | 635 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
12318
| Centerline Length (in) | 21.57 |
|---|---|
| Centerline Length (mm) | 548 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12322
| Centerline Length (in) | 14.83 |
|---|---|
| Centerline Length (mm) | 377 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12325
| Centerline Length (in) | 16.13 |
|---|---|
| Centerline Length (mm) | 410 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12329
| Centerline Length (in) | 15.89 |
|---|---|
| Centerline Length (mm) | 404 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12334
| Centerline Length (in) | 12.81 |
|---|---|
| Centerline Length (mm) | 325 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12341
| Centerline Length (in) | 15.4 |
|---|---|
| Centerline Length (mm) | 391 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12360
| Centerline Length (in) | 24.8 |
|---|---|
| Centerline Length (mm) | 630 |
| Inside Diameter 1 (in) | 0.56000000000000005 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.57999999999999996 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12361
| Centerline Length (in) | 31.1 |
|---|---|
| Centerline Length (mm) | 790 |
| Inside Diameter 1 (in) | 0.55000000000000004 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.56999999999999995 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12362
| Centerline Length (in) | 14.96 |
|---|---|
| Centerline Length (mm) | 380 |
| Inside Diameter 1 (in) | 0.57999999999999996 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12367
| Centerline Length (in) | 15.75 |
|---|---|
| Centerline Length (mm) | 400 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.69 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12368
| Centerline Length (in) | 2.76 |
|---|---|
| Centerline Length (mm) | 70 |
| Inside Diameter 1 (in) | 0.45 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12369
| Centerline Length (in) | 3.25 |
|---|---|
| Centerline Length (mm) | 83 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Notes | Molded |
12373
| Centerline Length (in) | 14.78 |
|---|---|
| Centerline Length (mm) | 375 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12376
| Centerline Length (in) | 17.23 |
|---|---|
| Centerline Length (mm) | 438 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12378
| Centerline Length (in) | 51 |
|---|---|
| Centerline Length (mm) | 1295 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.67 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Notes | Molded |
12381
| Centerline Length (in) | 6.5 |
|---|---|
| Centerline Length (mm) | 165 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
12384
| Centerline Length (in) | 13.5 |
|---|---|
| Centerline Length (mm) | 343 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12388
| Centerline Length (in) | 15.9 |
|---|---|
| Centerline Length (mm) | 404 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12389
| Centerline Length (in) | 9.6999999999999993 |
|---|---|
| Centerline Length (mm) | 246 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
12390
| Centerline Length (in) | 7.4 |
|---|---|
| Centerline Length (mm) | 188 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12391
| Centerline Length (in) | 8 |
|---|---|
| Centerline Length (mm) | 203 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12392
| Centerline Length (in) | 24.2 |
|---|---|
| Centerline Length (mm) | 615 |
| Inside Diameter 1 (in) | 0.34 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.28999999999999998 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12393
| Centerline Length (in) | 6.2 |
|---|---|
| Centerline Length (mm) | 158 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12394
| Centerline Length (in) | 31.5 |
|---|---|
| Centerline Length (mm) | 800 |
| Inside Diameter 1 (in) | 0.35 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.35 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Notes | Molded |
12395
| Centerline Length (in) | 6.2 |
|---|---|
| Centerline Length (mm) | 157 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12396
| Centerline Length (in) | 4 |
|---|---|
| Centerline Length (mm) | 102 |
| Inside Diameter 1 (in) | 0.27500000000000002 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.27500000000000002 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
12398
| Centerline Length (in) | 5.7 |
|---|---|
| Centerline Length (mm) | 145 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12399
| Centerline Length (in) | 7.33 |
|---|---|
| Centerline Length (mm) | 186 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12416
| Centerline Length (in) | 17.11 |
|---|---|
| Centerline Length (mm) | 435 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.35 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Notes | Molded |
12428
| Centerline Length (in) | 11.8 |
|---|---|
| Centerline Length (mm) | 300 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
12429
| Centerline Length (in) | 29 |
|---|---|
| Centerline Length (mm) | 737 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12430
| Centerline Length (in) | 39.375 |
|---|---|
| Centerline Length (mm) | 1000 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.78 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Notes | Molded |
12433
| Centerline Length (in) | 11.57 |
|---|---|
| Centerline Length (mm) | 294 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12434
| Centerline Length (in) | 25.7 |
|---|---|
| Centerline Length (mm) | 653 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12436
| Centerline Length (in) | 11.55 |
|---|---|
| Centerline Length (mm) | 293 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.83 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Notes | Molded |
12438
| Centerline Length (in) | 11.77 |
|---|---|
| Centerline Length (mm) | 299 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Notes | Molded |
12439
| Centerline Length (in) | 37 |
|---|---|
| Centerline Length (mm) | 940 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12440
| Centerline Length (in) | 11 |
|---|---|
| Centerline Length (mm) | 279 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12441
| Centerline Length (in) | 8.5 |
|---|---|
| Centerline Length (mm) | 216 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12442
| Centerline Length (in) | 24 |
|---|---|
| Centerline Length (mm) | 610 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12445
| Centerline Length (in) | 20.89 |
|---|---|
| Centerline Length (mm) | 530 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM, Plastic |
| Notes | Molded |
12448
| Centerline Length (in) | 12.88 |
|---|---|
| Centerline Length (mm) | 327 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12449
| Inside Diameter 3 (in) | 0.5 |
|---|---|
| Inside Diameter 3 (mm) | 13 |
| Inside Diameter 4 (in) | 0.5 |
| Inside Diameter 4 (mm) | 13 |
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12452
| Centerline Length (in) | 12.6 |
|---|---|
| Centerline Length (mm) | 320 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12453
| Centerline Length (in) | 13.56 |
|---|---|
| Centerline Length (mm) | 344 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12454
| Centerline Length (in) | 4.6500000000000004 |
|---|---|
| Centerline Length (mm) | 118 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12455
| Centerline Length (in) | 10.64 |
|---|---|
| Centerline Length (mm) | 270 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12456
| Centerline Length (in) | 5.7 |
|---|---|
| Centerline Length (mm) | 145 |
| Inside Diameter 1 (in) | 0.81 |
| Inside Diameter 1 (mm) | 21 |
| Inside Diameter 2 (in) | 0.81 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
12457
| Centerline Length (in) | 5.77 |
|---|---|
| Centerline Length (mm) | 147 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12458
| Centerline Length (in) | 7.8 |
|---|---|
| Centerline Length (mm) | 198 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12460
| Centerline Length (in) | 16.36 |
|---|---|
| Centerline Length (mm) | 416 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12461
| Centerline Length (in) | 11.6 |
|---|---|
| Centerline Length (mm) | 295 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12462
| Centerline Length (in) | 7.3 |
|---|---|
| Centerline Length (mm) | 185 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12463
| Centerline Length (in) | 21.8 |
|---|---|
| Centerline Length (mm) | 554 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12464
| Centerline Length (in) | 15 |
|---|---|
| Centerline Length (mm) | 381 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12465
| Centerline Length (in) | 19 |
|---|---|
| Centerline Length (mm) | 483 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM, Plastic, Steel |
| Notes | Molded |
12466
| Centerline Length (in) | 17.25 |
|---|---|
| Centerline Length (mm) | 438 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12467
| Centerline Length (in) | 17.3 |
|---|---|
| Centerline Length (mm) | 439 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12471
| Centerline Length (in) | 10.375 |
|---|---|
| Centerline Length (mm) | 264 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
12472
| Centerline Length (in) | 18.2 |
|---|---|
| Centerline Length (mm) | 462 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12473
| Centerline Length (in) | 8.85 |
|---|---|
| Centerline Length (mm) | 225 |
| Inside Diameter 1 (in) | 0.67 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12474
| Centerline Length (in) | 29.75 |
|---|---|
| Centerline Length (mm) | 756 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12477
| Centerline Length (in) | 6.6 |
|---|---|
| Centerline Length (mm) | 168 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12478
| Centerline Length (in) | 5.8 |
|---|---|
| Centerline Length (mm) | 147 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12481
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20 |
| Centerline Length (mm) | 508 |
| Inside Diameter 1 (in) | 0.709 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.697 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12482
| Centerline Length (in) | 49 |
|---|---|
| Centerline Length (mm) | 1245 |
| Inside Diameter 1 (in) | 0.73599999999999999 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.60199999999999998 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12483
| Centerline Length (in) | 24 |
|---|---|
| Centerline Length (mm) | 610 |
| Inside Diameter 1 (in) | 0.72799999999999998 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.96899999999999997 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Notes | Molded |
12484
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.25 |
| Centerline Length (mm) | 311 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12485
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Inside Diameter 1 (in) | 0.709 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.697 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12486
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.25 |
| Centerline Length (mm) | 311 |
| Inside Diameter 1 (in) | 0.709 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.697 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12487
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.625 |
| Centerline Length (mm) | 219 |
| Inside Diameter 1 (in) | 0.717 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.598 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12488
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 33 |
| Centerline Length (mm) | 838 |
| Inside Diameter 1 (in) | 0.726 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.715 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12489
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.5 |
| Centerline Length (mm) | 876 |
| Inside Diameter 1 (in) | 0.715 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.715 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12490
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.75 |
| Centerline Length (mm) | 273 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12491
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.5 |
| Centerline Length (mm) | 470 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.717 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12492
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.5 |
| Centerline Length (mm) | 597 |
| Inside Diameter 1 (in) | 0.984 |
| Inside Diameter 1 (mm) | 25 |
| Inside Diameter 2 (in) | 0.715 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12493
| Centerline Length (in) | 17.2 |
|---|---|
| Centerline Length (mm) | 437 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12495
| Centerline Length (in) | 24.75 |
|---|---|
| Centerline Length (mm) | 629 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12496
| Centerline Length (in) | 8.0299999999999994 |
|---|---|
| Centerline Length (mm) | 204 |
| Inside Diameter 1 (in) | 0.68 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12497
| Centerline Length (in) | 11.5 |
|---|---|
| Centerline Length (mm) | 292 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12498
| Centerline Length (in) | 11.5 |
|---|---|
| Centerline Length (mm) | 292 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12499
| Centerline Length (in) | 9.5 |
|---|---|
| Centerline Length (mm) | 241 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Notes | Molded |
12500
| Centerline Length (in) | 20 |
|---|---|
| Centerline Length (mm) | 508 |
| Inside Diameter 1 (in) | 0.47 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.47 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Notes | Molded |
12501
| Centerline Length (in) | 12.2 |
|---|---|
| Centerline Length (mm) | 310 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12502
| Centerline Length (in) | 16 |
|---|---|
| Centerline Length (mm) | 406 |
| Inside Diameter 1 (in) | 0.47 |
| Inside Diameter 1 (mm) | 12 |
| Inside Diameter 2 (in) | 0.47 |
| Inside Diameter 2 (mm) | 12 |
| Material | EPDM |
| Notes | Molded |
12506
| Centerline Length (in) | 17.100000000000001 |
|---|---|
| Centerline Length (mm) | 434 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12507
| Centerline Length (in) | 17.25 |
|---|---|
| Centerline Length (mm) | 438 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12509
| Centerline Length (in) | 3.75 |
|---|---|
| Centerline Length (mm) | 95 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12510
| Centerline Length (in) | 16 |
|---|---|
| Centerline Length (mm) | 406 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12511
| Centerline Length (in) | 4.375 |
|---|---|
| Centerline Length (mm) | 111 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
12512
| Centerline Length (in) | 5.5 |
|---|---|
| Centerline Length (mm) | 140 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Notes | Molded |
12513
| Centerline Length (in) | 27 |
|---|---|
| Centerline Length (mm) | 686 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12514
| Centerline Length (in) | 17.5 |
|---|---|
| Centerline Length (mm) | 445 |
| Inside Diameter 1 (in) | 0.96 |
| Inside Diameter 1 (mm) | 24 |
| Inside Diameter 2 (in) | 0.96 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Notes | Molded |
12515
| Centerline Length (in) | 10 |
|---|---|
| Centerline Length (mm) | 254 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12516
| Centerline Length (in) | 23.5 |
|---|---|
| Centerline Length (mm) | 597 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Notes | Molded |
12518
| Centerline Length (in) | 19.68 |
|---|---|
| Centerline Length (mm) | 500 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Notes | Molded |
12519
| Centerline Length (in) | 9.4499999999999993 |
|---|---|
| Centerline Length (mm) | 240 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12520
| Centerline Length (in) | 16 |
|---|---|
| Centerline Length (mm) | 405 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12521
| Centerline Length (in) | 32.5 |
|---|---|
| Centerline Length (mm) | 826 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12522
| Centerline Length (in) | 34 |
|---|---|
| Centerline Length (mm) | 862 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Notes | Molded |
12524
| Centerline Length (in) | 16.125 |
|---|---|
| Centerline Length (mm) | 410 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12530
| Centerline Length (in) | 20.5 |
|---|---|
| Centerline Length (mm) | 521 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12533
| Centerline Length (in) | 13.25 |
|---|---|
| Centerline Length (mm) | 337 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12534
| Centerline Length (in) | 19.75 |
|---|---|
| Centerline Length (mm) | 502 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12535
| Centerline Length (in) | 20.5 |
|---|---|
| Centerline Length (mm) | 521 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Notes | Molded |
12539
| Centerline Length (in) | 16.5 |
|---|---|
| Centerline Length (mm) | 419 |
| Inside Diameter 1 (in) | 0.3125 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3125 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
12540
| Centerline Length (in) | 22 |
|---|---|
| Centerline Length (mm) | 559 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12541
| Centerline Length (in) | 25.75 |
|---|---|
| Centerline Length (mm) | 654 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12542
| Centerline Length (in) | 10.5 |
|---|---|
| Centerline Length (mm) | 267 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12543
| Centerline Length (in) | 19 |
|---|---|
| Centerline Length (mm) | 483 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12544
| Centerline Length (in) | 13.5 |
|---|---|
| Centerline Length (mm) | 343 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12545
| Centerline Length (in) | 15.4 |
|---|---|
| Centerline Length (mm) | 391 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12551
| Centerline Length (in) | 19.7 |
|---|---|
| Centerline Length (mm) | 500 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12552
| Centerline Length (in) | 18.2 |
|---|---|
| Centerline Length (mm) | 462 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12553
| Centerline Length (in) | 20.5 |
|---|---|
| Centerline Length (mm) | 520 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
12554
| Centerline Length (in) | 15.75 |
|---|---|
| Centerline Length (mm) | 400 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12555
| Centerline Length (in) | 26.2 |
|---|---|
| Centerline Length (mm) | 665 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12557
| Centerline Length (in) | 6.9 |
|---|---|
| Centerline Length (mm) | 175 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.96 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Notes | Molded |
12558
| Centerline Length (in) | 18.5 |
|---|---|
| Centerline Length (mm) | 470 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12559
| Centerline Length (in) | 20.875 |
|---|---|
| Centerline Length (mm) | 530 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Notes | Molded |
12560
| Centerline Length (in) | 30.5 |
|---|---|
| Centerline Length (mm) | 775 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12561
| Centerline Length (in) | 22.25 |
|---|---|
| Centerline Length (mm) | 565 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
12562
| Centerline Length (in) | 26 |
|---|---|
| Centerline Length (mm) | 661 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
12564
| Centerline Length (in) | 23 |
|---|---|
| Centerline Length (mm) | 584 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12566
| Centerline Length (in) | 8.75 |
|---|---|
| Centerline Length (mm) | 222 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12567
| Centerline Length (in) | 30.625 |
|---|---|
| Centerline Length (mm) | 778 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12568
| Centerline Length (in) | 15.5 |
|---|---|
| Centerline Length (mm) | 394 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.8 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
12570
| Centerline Length (in) | 22.625 |
|---|---|
| Centerline Length (mm) | 575 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
12572
| Centerline Length (in) | 45.75 |
|---|---|
| Centerline Length (mm) | 1162 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
12574
| Centerline Length (in) | 11.5 |
|---|---|
| Centerline Length (mm) | 292 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
12575
| Centerline Length (in) | 13.25 |
|---|---|
| Centerline Length (mm) | 337 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
12577
| Centerline Length (in) | 13.5 |
|---|---|
| Centerline Length (mm) | 343 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
12578
| Centerline Length (in) | 8.5 |
|---|---|
| Centerline Length (mm) | 216 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
12581
| Centerline Length (in) | 7 |
|---|---|
| Centerline Length (mm) | 178 |
| Inside Diameter 1 (in) | 0.43 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.43 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM |
12582
| Centerline Length (in) | 4.43 |
|---|---|
| Centerline Length (mm) | 113 |
| Inside Diameter 1 (in) | 0.43 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.43 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM |
12583
| Centerline Length (in) | 7.5 |
|---|---|
| Centerline Length (mm) | 191 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
12584
| Centerline Length (in) | 4.75 |
|---|---|
| Centerline Length (mm) | 121 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
12588
| Centerline Length (in) | 5.5 |
|---|---|
| Centerline Length (mm) | 140 |
| Inside Diameter 1 (in) | 0.28000000000000003 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28000000000000003 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
12634
| Centerline Length (in) | 22 |
|---|---|
| Centerline Length (mm) | 559 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
18001
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.1 |
| Centerline Length (mm) | 866 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 301 |
| Weight (lbs.) | 0.69 |
18002
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 632 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.39 |
18003
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.1 |
| Centerline Length (mm) | 434 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 499 |
| Weight (lbs.) | 0.28 |
18010
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.09 |
18011
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.16 |
18016
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.9 |
| Centerline Length (mm) | 378 |
| Hose Inside Diameter (in). | 0.44 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 754 |
| Weight (lbs.) | 0.16 |
18017
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.9 |
| Centerline Length (mm) | 709 |
| Hose Inside Diameter (in). | 0.37 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.37 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.37 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 739 |
| Weight (lbs.) | 0.23 |
18018
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.3 |
| Centerline Length (mm) | 770 |
| Hose Inside Diameter (in). | 0.37 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.37 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.44 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 185 |
| Weight (lbs.) | 0.26 |
18019
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.8 |
| Centerline Length (mm) | 300 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2241 |
| Weight (lbs.) | 0.09 |
18020
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1555 |
| Weight (lbs.) | 0.13 |
18021
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.18 |
18022
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 499 |
| Weight (lbs.) | 0.3 |
18023
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.4 |
| Centerline Length (mm) | 391 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.28 |
18025
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.8 |
| Centerline Length (mm) | 528 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.35 |
18028
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.3 |
| Centerline Length (mm) | 363 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 600 |
| Weight (lbs.) | 0.22 |
18030
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2800 |
| Weight (lbs.) | 0.11 |
18031
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.21 |
18034
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.9 |
| Centerline Length (mm) | 429 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.3 |
18035
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.4 |
| Centerline Length (mm) | 569 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.38 |
18038
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.3 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.32 |
18039
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9 |
| Centerline Length (mm) | 229 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 800 |
| Weight (lbs.) | 0.14 |
18040
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.5 |
| Centerline Length (mm) | 318 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 675 |
| Weight (lbs.) | 0.21 |
18043
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.6 |
| Centerline Length (mm) | 269 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.19 |
18044
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.9 |
| Centerline Length (mm) | 226 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 800 |
| Weight (lbs.) | 0.14 |
18045
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.5 |
| Centerline Length (mm) | 292 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.2 |
18047
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.5 |
| Centerline Length (mm) | 292 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.2 |
18048
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 997 |
| Weight (lbs.) | 0.2 |
18053
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.4 |
| Centerline Length (mm) | 366 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 360 |
| Weight (lbs.) | 0.26 |
18054
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 648 |
| Weight (lbs.) | 0.21 |
18055
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.23 |
18056
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.1 |
| Centerline Length (mm) | 358 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.21 |
18058
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.1 |
| Centerline Length (mm) | 434 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.28 |
18059
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.2 |
| Centerline Length (mm) | 538 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.34 |
18061
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.9 |
| Centerline Length (mm) | 607 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 325 |
| Weight (lbs.) | 0.39 |
18062
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 400 |
| Weight (lbs.) | 0.3 |
18063
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.1 |
| Centerline Length (mm) | 333 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 400 |
| Weight (lbs.) | 0.31 |
18065
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.9 |
| Centerline Length (mm) | 226 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.94 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.16 |
18066
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.2 |
| Centerline Length (mm) | 259 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.94 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 250 |
| Weight (lbs.) | 0.21 |
18067
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.5 |
| Centerline Length (mm) | 521 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 250 |
| Weight (lbs.) | 0.41 |
18068
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.7 |
| Centerline Length (mm) | 399 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.26 |
18069
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.6 |
| Centerline Length (mm) | 269 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.18 |
18070
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 729 |
| Weight (lbs.) | 0.25 |
18071
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 110 |
| Weight (lbs.) | 0.38 |
18072
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.6 |
| Centerline Length (mm) | 650 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.6 |
18073
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.6 |
| Centerline Length (mm) | 701 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.9 |
18074
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 39.6 |
| Centerline Length (mm) | 1006 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 140 |
| Weight (lbs.) | 0.91 |
18075
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 63.6 |
| Centerline Length (mm) | 1615 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.39 |
18077
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.6 |
| Centerline Length (mm) | 930 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.87 |
18078
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 41.6 |
| Centerline Length (mm) | 1057 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.9 |
18079
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 729 |
| Weight (lbs.) | 0.25 |
18088
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 444 |
| Weight (lbs.) | 0.26 |
18089
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.7 |
| Centerline Length (mm) | 500 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 500 |
| Weight (lbs.) | 0.13 |
18090
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.1 |
| Centerline Length (mm) | 485 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 500 |
| Weight (lbs.) | 0.14 |
18092
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.5 |
| Centerline Length (mm) | 267 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.83 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 600 |
| Weight (lbs.) | 0.19 |
18093
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.8 |
| Centerline Length (mm) | 224 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.83 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.16 |
18094
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.8 |
| Centerline Length (mm) | 884 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 450 |
| Weight (lbs.) | 0.29 |
18095
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.4 |
| Centerline Length (mm) | 620 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.46 |
18100
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.5 |
| Centerline Length (mm) | 216 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.11 |
18106
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.18 |
18112
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.9 |
| Centerline Length (mm) | 556 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.27 |
18114
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.17 |
18119
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.5 |
| Centerline Length (mm) | 368 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.16 |
18121
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11 |
| Centerline Length (mm) | 279 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.12 |
18124
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.7 |
| Centerline Length (mm) | 145 |
| Hose Inside Diameter (in). | 0.27 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.27 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.27 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.09 |
18125
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.2 |
| Centerline Length (mm) | 107 |
| Hose Inside Diameter (in). | 0.23 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.23 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.23 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.04 |
18126
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.78 |
| Centerline Length (mm) | 909 |
| Hose Inside Diameter (in). | 0.23 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.23 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.28 |
18127
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.7 |
| Centerline Length (mm) | 500 |
| Hose Inside Diameter (in). | 0.24 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.24 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.35 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.17 |
18129
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.9 |
| Centerline Length (mm) | 836 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.26 |
18130
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31 |
| Centerline Length (mm) | 787 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.24 |
18132
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8 |
| Centerline Length (mm) | 203 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.05 |
18141
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14 |
| Centerline Length (mm) | 356 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 650 |
| Weight (lbs.) | 0.21 |
18142
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.7 |
| Centerline Length (mm) | 145 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.11 |
18145
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21 |
| Centerline Length (mm) | 533 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.36 |
18147
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.2 |
| Centerline Length (mm) | 107 |
| Hose Inside Diameter (in). | 0.92 |
| Hose Inside Diameter (mm) | 23 |
| Inside Diameter 1 (in) | 0.92 |
| Inside Diameter 1 (mm) | 23 |
| Inside Diameter 2 (in) | 0.92 |
| Inside Diameter 2 (mm) | 23 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.1 |
18148
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25 |
| Centerline Length (mm) | 635 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.46 |
18149
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 6325 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.43 |
18152
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.6 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 675 |
| Weight (lbs.) | 0.21 |
18156
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.4 |
| Centerline Length (mm) | 544 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 315 |
| Weight (lbs.) | 0.49 |
18157
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.2 |
| Centerline Length (mm) | 437 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.32 |
18159
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.1 |
| Centerline Length (mm) | 130 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.08 |
18160
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.9 |
| Centerline Length (mm) | 124 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.08 |
18170
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8 |
| Centerline Length (mm) | 203 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.06 |
18171
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.2 |
| Centerline Length (mm) | 132 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3500 |
| Weight (lbs.) | 0.03 |
18173
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7 |
| Centerline Length (mm) | 178 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2450 |
| Weight (lbs.) | 0.04 |
18174
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7 |
| Centerline Length (mm) | 178 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2450 |
| Weight (lbs.) | 0.04 |
18177
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8 |
| Centerline Length (mm) | 203 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.04 |
18178
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.5 |
| Centerline Length (mm) | 140 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.03 |
18179
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.2 |
| Centerline Length (mm) | 183 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2450 |
| Weight (lbs.) | 0.04 |
18182
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 3.8 |
| Centerline Length (mm) | 97 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 5950 |
| Weight (lbs.) | 0.03 |
18188
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.9 |
| Centerline Length (mm) | 150 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1540 |
| Weight (lbs.) | 0.09 |
18193
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.7 |
| Centerline Length (mm) | 221 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.07 |
18194
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.8 |
| Centerline Length (mm) | 401 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.31 |
18197
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.6 |
| Centerline Length (mm) | 371 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.11 |
18200
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.1 |
| Centerline Length (mm) | 180 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3500 |
| Weight (lbs.) | 0.11 |
18201
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.5 |
| Centerline Length (mm) | 165 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.09 |
18202
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.8 |
| Centerline Length (mm) | 224 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.13 |
18204
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.16 |
18205
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.9 |
| Centerline Length (mm) | 277 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.14 |
18206
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.7 |
| Centerline Length (mm) | 272 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.14 |
18210
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.4 |
| Centerline Length (mm) | 366 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.18 |
18214
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17 |
| Centerline Length (mm) | 432 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.21 |
18219
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.35 |
| Centerline Length (mm) | 187 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.1 |
18222
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.57 |
| Centerline Length (mm) | 294 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.12 |
18223
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.12 |
18225
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 9.9 |
18230
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 9.9 |
18239
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.6 |
| Centerline Length (mm) | 168 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 75 |
| Weight (lbs.) | 0.09 |
18240
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.4 |
| Centerline Length (mm) | 188 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.1 |
18241
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.8 |
| Centerline Length (mm) | 249 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.12 |
18244
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.08 |
18246
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.6 |
| Centerline Length (mm) | 498 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.23 |
18247
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 632 |
| Hose Inside Diameter (in). | 0.33 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.33 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.33 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.24 |
18249
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.1 |
| Centerline Length (mm) | 180 |
| Hose Inside Diameter (in). | 0.34 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.34 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.34 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.08 |
18250
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.8 |
| Centerline Length (mm) | 198 |
| Hose Inside Diameter (in). | 0.34 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.34 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.34 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.08 |
18254
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.2 |
| Centerline Length (mm) | 411 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.28 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.15 |
18255
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.5 |
| Centerline Length (mm) | 572 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.22 |
18258
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11 |
| Centerline Length (mm) | 279 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.11 |
18261
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 46.8 |
| Centerline Length (mm) | 1189 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.41 |
18263
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6 |
| Centerline Length (mm) | 152 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.07 |
18265
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.1 |
| Centerline Length (mm) | 231 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.1 |
18266
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.8 |
| Centerline Length (mm) | 147 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.07 |
18269
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 48.5 |
| Centerline Length (mm) | 1232 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.42 |
18273
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.2 |
| Centerline Length (mm) | 564 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.22 |
18274
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.3 |
| Centerline Length (mm) | 312 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.13 |
18275
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 47.8 |
| Centerline Length (mm) | 1214 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.46 |
18276
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.3 |
| Centerline Length (mm) | 313 |
| Hose Inside Diameter (in). | 0.28 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.28 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.37 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.12 |
18283
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.3 |
| Centerline Length (mm) | 414 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.1 |
18285
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.4 |
| Centerline Length (mm) | 798 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.25 |
18286
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.16 |
18288
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.3 |
| Centerline Length (mm) | 592 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.2 |
18295
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.5 |
| Centerline Length (mm) | 902 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.34 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.26 |
18296
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 33.9 |
| Centerline Length (mm) | 861 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.35 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.2 |
18297
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 39.4 |
| Centerline Length (mm) | 1001 |
| Hose Inside Diameter (in). | 0.27 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.27 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.26 |
18301
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.9 |
| Centerline Length (mm) | 251 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.16 |
18304
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.21 |
18309
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.7 |
| Centerline Length (mm) | 297 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 120 |
| Weight (lbs.) | 0.2 |
18313
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.6 |
| Centerline Length (mm) | 193 |
| Hose Inside Diameter (in). | 0.37 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.37 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.37 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 70 |
| Weight (lbs.) | 0.1 |
18314
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.35 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.35 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.35 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.18 |
18320
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.2 |
| Centerline Length (mm) | 157 |
| Hose Inside Diameter (in). | 0.37 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.37 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.37 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.08 |
18321
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.5 |
| Centerline Length (mm) | 546 |
| Hose Inside Diameter (in). | 0.36 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.36 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.26 |
18322
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| Hose Inside Diameter (in). | 0.36 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.36 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.24 |
18324
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.36 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.36 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.17 |
18327
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.1 |
| Centerline Length (mm) | 638 |
| Hose Inside Diameter (in). | 0.39 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.39 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.39 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.25 |
18329
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.8 |
| Centerline Length (mm) | 808 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 10 |
| Inside Diameter 1 (in) | 0.38 |
| Inside Diameter 1 (mm) | 10 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.32 |
18332
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.6 |
| Centerline Length (mm) | 168 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2803 |
| Weight (lbs.) | 0.04 |
18333
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.3 |
| Centerline Length (mm) | 693 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.38 |
| Inside Diameter 2 (mm) | 10 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 603 |
| Weight (lbs.) | 0.31 |
18334
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.9 |
| Centerline Length (mm) | 429 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1508 |
| Weight (lbs.) | 0.12 |
18335
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.6 |
| Centerline Length (mm) | 193 |
| Hose Inside Diameter (in). | 0.26 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.26 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.26 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2800 |
| Weight (lbs.) | 0.04 |
18336
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.7 |
| Centerline Length (mm) | 221 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.16 |
18337
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.5 |
| Centerline Length (mm) | 165 |
| Hose Inside Diameter (in). | 0.26 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.26 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.26 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3850 |
| Weight (lbs.) | 0.03 |
18338
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.8 |
| Centerline Length (mm) | 122 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.03 |
18340
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.8 |
| Centerline Length (mm) | 833 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.28 |
18341
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.3 |
| Centerline Length (mm) | 439 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.13 |
18343
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.8 |
| Centerline Length (mm) | 427 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 385 |
| Weight (lbs.) | 0.31 |
18344
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.75 |
| Centerline Length (mm) | 552 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.32 |
18345
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.2 |
| Centerline Length (mm) | 589 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.43 |
18346
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.31 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.34 |
18347
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.93 |
| Centerline Length (mm) | 430 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.33 |
18349
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.09 |
18350
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.8 |
| Centerline Length (mm) | 579 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.39 |
18351
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.9 |
| Centerline Length (mm) | 709 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.46 |
18352
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.6 |
| Centerline Length (mm) | 142 |
| Hose Inside Diameter (in). | 0.44 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.11 |
18355
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.3 |
| Centerline Length (mm) | 871 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.6 |
18356
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.1 |
| Centerline Length (mm) | 155 |
| Hose Inside Diameter (in). | 0.36 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.36 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3500 |
| Weight (lbs.) | 0.06 |
18359
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.09 |
18360
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.59 |
| Centerline Length (mm) | 345 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.1 |
18361
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.8 |
| Centerline Length (mm) | 224 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2800 |
| Weight (lbs.) | 0.07 |
18364
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.5 |
| Centerline Length (mm) | 165 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3850 |
| Weight (lbs.) | 0.03 |
18365
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.85 |
| Centerline Length (mm) | 682 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.49 |
18367
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.35 |
| Centerline Length (mm) | 517 |
| Hose Inside Diameter (in). | 0.58 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.58 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.58 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.34 |
18368
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.27 |
18369
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.04 |
| Centerline Length (mm) | 534 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.38 |
18370
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.35 |
| Centerline Length (mm) | 161 |
| Hose Inside Diameter (in). | 0.7 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.12 |
18375
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.12 |
18376
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.1 |
18382
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.47 |
| Centerline Length (mm) | 418 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.88 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1800 |
| Weight (lbs.) | 0.3 |
18383
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.3 |
| Centerline Length (mm) | 338 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.1 |
18384
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.7 |
| Centerline Length (mm) | 272 |
| Hose Inside Diameter (in). | 0.32 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.32 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.32 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.09 |
18386
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.02 |
| Centerline Length (mm) | 483 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.34 |
18392
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.1 |
| Centerline Length (mm) | 130 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.03 |
18395
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6 |
| Centerline Length (mm) | 152 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.03 |
18396
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8 |
| Centerline Length (mm) | 203 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.04 |
18397
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5 |
| Centerline Length (mm) | 127 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3500 |
| Weight (lbs.) | 0.03 |
18398
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.1 |
| Centerline Length (mm) | 130 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.03 |
18399
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.3 |
| Centerline Length (mm) | 185 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.04 |
18400
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.3 |
| Centerline Length (mm) | 211 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.21 |
18413
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25 |
| Centerline Length (mm) | 635 |
| Hose Inside Diameter (in). | 0.55 |
| Hose Inside Diameter (mm) | 14 |
| Inside Diameter 1 (in) | 0.55 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.58 |
18418
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.58 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.58 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.58 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.25 |
18420
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.5 |
| Centerline Length (mm) | 216 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.18 |
18421
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8 |
| Centerline Length (mm) | 203 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.23 |
18422
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.5 |
| Centerline Length (mm) | 267 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.25 |
18423
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.7 |
| Centerline Length (mm) | 246 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.22 |
18424
| Inside Diameter (in) | 0.52 |
|---|---|
| Inside Diameter (mm) | 13 |
18429
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.5 |
| Centerline Length (mm) | 368 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.33 |
18430
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.4 |
| Centerline Length (mm) | 594 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.46 |
18433
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
18437
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19 |
| Centerline Length (mm) | 483 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.41 |
18440
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.3 |
| Centerline Length (mm) | 287 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.25 |
18441
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.2 |
| Centerline Length (mm) | 183 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.14 |
18446
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16 |
| Centerline Length (mm) | 406 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.38 |
18449
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.9 |
| Centerline Length (mm) | 607 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.6 |
18451
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28 |
| Centerline Length (mm) | 711 |
| Hose Inside Diameter (in). | 0.56 |
| Hose Inside Diameter (mm) | 14 |
| Inside Diameter 1 (in) | 0.56 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.63 |
18453
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.1 |
| Centerline Length (mm) | 180 |
| Hose Inside Diameter (in). | 0.58 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.58 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.58 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.15 |
18454
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7 |
| Centerline Length (mm) | 178 |
| Hose Inside Diameter (in). | 0.51 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.51 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.14 |
18455
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.24 |
18456
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.7 |
| Centerline Length (mm) | 272 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.19 |
18457
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.3 |
| Centerline Length (mm) | 465 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.33 |
18458
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.18 |
18460
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.7 |
| Centerline Length (mm) | 170 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.14 |
18461
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.8 |
| Centerline Length (mm) | 173 |
| Hose Inside Diameter (in). | 0.46 |
| Hose Inside Diameter (mm) | 12 |
| Inside Diameter 1 (in) | 0.46 |
| Inside Diameter 1 (mm) | 12 |
| Inside Diameter 2 (in) | 0.46 |
| Inside Diameter 2 (mm) | 12 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.12 |
18462
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5 |
| Centerline Length (mm) | 127 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.11 |
18463
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.6 |
| Centerline Length (mm) | 371 |
| Hose Inside Diameter (in). | 0.52 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.52 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.52 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.26 |
18466
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11 |
| Centerline Length (mm) | 279 |
| Hose Inside Diameter (in). | 0.51 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.51 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.51 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.21 |
18468
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.7 |
| Centerline Length (mm) | 475 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.31 |
18472
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.3 |
| Centerline Length (mm) | 439 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.2 |
18473
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.3 |
| Centerline Length (mm) | 236 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.1 |
18474
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.8 |
| Centerline Length (mm) | 300 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.17 |
18475
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.7 |
| Centerline Length (mm) | 221 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.16 |
18476
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.6 |
| Centerline Length (mm) | 371 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.19 |
18478
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.4 |
| Centerline Length (mm) | 290 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.16 |
18480
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10 |
| Centerline Length (mm) | 254 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.15 |
18481
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.3 |
| Centerline Length (mm) | 287 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.15 |
18484
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.55 |
| Hose Inside Diameter (mm) | 14 |
| Inside Diameter 1 (in) | 0.55 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.55 |
| Inside Diameter 2 (mm) | 14 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.2 |
18485
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.4 |
| Centerline Length (mm) | 493 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.3 |
18486
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.8 |
| Centerline Length (mm) | 401 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.25 |
18487
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.9 |
| Centerline Length (mm) | 607 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.5 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.34 |
18489
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.3 |
| Centerline Length (mm) | 312 |
| Hose Inside Diameter (in). | 0.55 |
| Hose Inside Diameter (mm) | 14 |
| Inside Diameter 1 (in) | 0.55 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.2 |
18495
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.8 |
| Centerline Length (mm) | 401 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.5 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 754 |
| Weight (lbs.) | 0.21 |
18496
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27 |
| Centerline Length (mm) | 686 |
| Hose Inside Diameter (in). | 0.44 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.53 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.29 |
18503
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| Hose Inside Diameter (in). | 0.51 |
| Hose Inside Diameter (mm) | 13 |
| Inside Diameter 1 (in) | 0.51 |
| Inside Diameter 1 (mm) | 13 |
| Inside Diameter 2 (in) | 0.51 |
| Inside Diameter 2 (mm) | 13 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.1 |
18505
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.4 |
| Centerline Length (mm) | 721 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.49 |
18510
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.48 |
| Centerline Length (mm) | 165 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2800 |
| Weight (lbs.) | 0.06 |
18513
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.7 |
| Centerline Length (mm) | 526 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.39 |
18514
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.99 |
| Centerline Length (mm) | 559 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.46 |
18516
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.05 |
| Centerline Length (mm) | 357 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 875 |
| Weight (lbs.) | 0.28 |
18517
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.04 |
| Centerline Length (mm) | 382 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.36 |
18518
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.78 |
| Centerline Length (mm) | 401 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.36 |
18522
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.03 |
| Centerline Length (mm) | 204 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.07 |
18523
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.5 |
| Centerline Length (mm) | 775 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 210 |
| Weight (lbs.) | 0.49 |
18524
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.76 |
| Centerline Length (mm) | 705 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.43 |
18526
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.73 |
| Centerline Length (mm) | 501 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.37 |
18530
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.4 |
| Centerline Length (mm) | 772 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 210 |
| Weight (lbs.) | 0.65 |
18535
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.87 |
| Centerline Length (mm) | 708 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.77 |
18542
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.5 |
| Centerline Length (mm) | 241 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.2 |
18544
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.58 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.33 |
18546
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.18 |
18547
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.21 |
| Centerline Length (mm) | 463 |
| Hose Inside Diameter (in). | 0.55 |
| Hose Inside Diameter (mm) | 14 |
| Inside Diameter 1 (in) | 0.55 |
| Inside Diameter 1 (mm) | 14 |
| Inside Diameter 2 (in) | 0.55 |
| Inside Diameter 2 (mm) | 14 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.26 |
18550
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.26 |
| Centerline Length (mm) | 464 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.42 |
18552
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.74 |
| Centerline Length (mm) | 298 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.08 |
18553
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.41 |
| Centerline Length (mm) | 264 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.09 |
18554
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.82 |
| Centerline Length (mm) | 453 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.09 |
18555
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.3 |
| Centerline Length (mm) | 693 |
| Hose Inside Diameter (in). | 0.36 |
| Hose Inside Diameter (mm) | 9 |
| Inside Diameter 1 (in) | 0.36 |
| Inside Diameter 1 (mm) | 9 |
| Inside Diameter 2 (in) | 0.36 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.23 |
18558
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.55 |
| Centerline Length (mm) | 319 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.1 |
18560
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.85 |
| Centerline Length (mm) | 479 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 560 |
| Weight (lbs.) | 0.31 |
18561
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.08 |
| Centerline Length (mm) | 586 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.39 |
18562
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.33 |
| Centerline Length (mm) | 313 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.21 |
18563
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.71 |
| Centerline Length (mm) | 475 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.33 |
18565
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.52 |
| Centerline Length (mm) | 369 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.32 |
18567
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.87 |
| Centerline Length (mm) | 555 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.39 |
18569
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.44 |
| Centerline Length (mm) | 646 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.41 |
18580
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.81 |
| Centerline Length (mm) | 503 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 1.19 |
18581
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.79 |
| Centerline Length (mm) | 350 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.84 |
18583
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.49 |
| Centerline Length (mm) | 292 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.75 |
18588
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.47 |
| Centerline Length (mm) | 571 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 1.2 |
18589
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.8 |
| Centerline Length (mm) | 376 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.26 |
18593
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.27 |
| Centerline Length (mm) | 337 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.31 |
18596
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.51 |
| Centerline Length (mm) | 191 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.34 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.1 |
18597
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.17 |
| Centerline Length (mm) | 233 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.34 |
| Inside Diameter 2 (mm) | 9 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.08 |
18598
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.5 |
| Centerline Length (mm) | 343 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.31 |
18600
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.67 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.33 |
18603
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.01 |
| Centerline Length (mm) | 356 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 420 |
| Weight (lbs.) | 0.31 |
18604
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.96 |
| Centerline Length (mm) | 329 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.31 |
18610
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.24 |
| Centerline Length (mm) | 362 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 875 |
| Weight (lbs.) | 0.3 |
18611
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.16 |
| Centerline Length (mm) | 360 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 875 |
| Weight (lbs.) | 0.26 |
18615
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.86 |
| Centerline Length (mm) | 403 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.36 |
18618
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.26 |
| Centerline Length (mm) | 184 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2450 |
| Weight (lbs.) | 0.09 |
18619
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.26 |
| Centerline Length (mm) | 134 |
| Hose Inside Diameter (in). | 0.29 |
| Hose Inside Diameter (mm) | 7 |
| Inside Diameter 1 (in) | 0.29 |
| Inside Diameter 1 (mm) | 7 |
| Inside Diameter 2 (in) | 0.29 |
| Inside Diameter 2 (mm) | 7 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1750 |
| Weight (lbs.) | 0.04 |
18622
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23 |
| Centerline Length (mm) | 584 |
| Hose Inside Diameter (in). | 0.48 |
| Hose Inside Diameter (mm) | 12 |
| Inside Diameter 1 (in) | 0.48 |
| Inside Diameter 1 (mm) | 12 |
| Inside Diameter 2 (in) | 0.48 |
| Inside Diameter 2 (mm) | 12 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.33 |
18623
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.83 |
| Centerline Length (mm) | 123 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6 |
| Inside Diameter 1 (in) | 0.25 |
| Inside Diameter 1 (mm) | 6 |
| Inside Diameter 2 (in) | 0.25 |
| Inside Diameter 2 (mm) | 6 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.03 |
18626
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.8 |
| Centerline Length (mm) | 427 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.36 |
18628
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.4 |
| Centerline Length (mm) | 188 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.33 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.1 |
18629
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.11 |
| Centerline Length (mm) | 130 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.33 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.1 |
18630
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.71 |
| Centerline Length (mm) | 221 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2800 |
| Weight (lbs.) | 0.1 |
18632
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.17 |
| Centerline Length (mm) | 411 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.3 |
18641
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.58 |
| Centerline Length (mm) | 243 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.23 |
18653
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.33 |
18655
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.59 |
| Centerline Length (mm) | 371 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 875 |
| Weight (lbs.) | 0.26 |
18656
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.35 |
| Centerline Length (mm) | 288 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 875 |
| Weight (lbs.) | 0.21 |
18657
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.2 |
| Centerline Length (mm) | 538 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.39 |
18659
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.48 |
| Centerline Length (mm) | 469 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.35 |
18665
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.59 |
| Centerline Length (mm) | 218 |
| Hose Inside Diameter (in). | 0.45 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.45 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.45 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.13 |
18670
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.33 |
| Centerline Length (mm) | 212 |
| Hose Inside Diameter (in). | 0.44 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.44 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1575 |
| Weight (lbs.) | 0.1 |
18685
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.98 |
| Centerline Length (mm) | 660 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.31 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.31 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 490 |
| Weight (lbs.) | 0.2 |
18697
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.61 |
| Centerline Length (mm) | 117 |
| Hose Inside Diameter (in). | 0.44 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.44 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 3500 |
| Weight (lbs.) | 0.1 |
18700
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12 |
| Centerline Length (mm) | 305 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.31 |
18701
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.36 |
18702
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 37.9 |
| Centerline Length (mm) | 963 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.89 |
18703
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.6 |
| Centerline Length (mm) | 498 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.45 |
18704
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.4 |
| Centerline Length (mm) | 391 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.36 |
18705
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.5 |
| Centerline Length (mm) | 318 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.29 |
18706
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.1 |
| Centerline Length (mm) | 282 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.26 |
18708
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.6 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.29 |
18709
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.2 |
| Centerline Length (mm) | 589 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.44 |
18710
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.9 |
| Centerline Length (mm) | 328 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.34 |
18713
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.53 |
18717
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14 |
| Centerline Length (mm) | 356 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 125 |
| Weight (lbs.) | 0.26 |
18718
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.3 |
| Centerline Length (mm) | 439 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.51 |
18720
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17 |
| Centerline Length (mm) | 432 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.49 |
18724
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 475 |
| Weight (lbs.) | 0.32 |
18725
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.1 |
| Centerline Length (mm) | 257 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 220 |
| Weight (lbs.) | 0.2 |
18729
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.7 |
| Centerline Length (mm) | 729 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 65 |
| Weight (lbs.) | 0.68 |
18732
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.7 |
| Centerline Length (mm) | 577 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.57 |
18733
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.4 |
| Centerline Length (mm) | 163 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.12 |
18735
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.2 |
| Centerline Length (mm) | 411 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.32 |
18737
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.5 |
| Centerline Length (mm) | 318 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.34 |
18738
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.7 |
| Centerline Length (mm) | 246 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.24 |
18739
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.3 |
| Centerline Length (mm) | 262 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 165 |
| Weight (lbs.) | 0.27 |
18740
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.2 |
| Centerline Length (mm) | 157 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.17 |
18741
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.2 |
| Centerline Length (mm) | 234 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.24 |
18742
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.1 |
| Centerline Length (mm) | 206 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.83 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.22 |
18743
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.8 |
| Centerline Length (mm) | 249 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.32 |
18744
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 85 |
| Weight (lbs.) | 0.48 |
18745
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.3 |
| Centerline Length (mm) | 363 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.62 |
18746
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.2 |
| Centerline Length (mm) | 234 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.25 |
18748
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 180 |
| Weight (lbs.) | 0.29 |
18749
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.9 |
| Centerline Length (mm) | 251 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.28 |
18750
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.31 |
18751
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.32 |
18754
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 95 |
| Weight (lbs.) | 0.45 |
18755
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.1 |
| Centerline Length (mm) | 257 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.69 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.25 |
18758
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.5 |
18761
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.5 |
| Centerline Length (mm) | 216 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.39 |
18763
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.5 |
| Centerline Length (mm) | 597 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.6 |
18764
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.3 |
| Centerline Length (mm) | 566 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.54 |
18765
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.4 |
| Centerline Length (mm) | 696 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.68 |
18767
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 43.8 |
| Centerline Length (mm) | 1113 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.78 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 1.04 |
18768
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 33.1 |
| Centerline Length (mm) | 841 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.8 |
18769
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.3 |
| Centerline Length (mm) | 363 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.34 |
18770
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.5 |
| Centerline Length (mm) | 927 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.8 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.95 |
18772
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.7 |
| Centerline Length (mm) | 399 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.36 |
18773
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.32 |
18774
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 462 |
| Weight (lbs.) | 0.42 |
18775
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.1 |
| Centerline Length (mm) | 231 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.25 |
18777
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.2 |
| Centerline Length (mm) | 183 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.22 |
18778
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.8 |
| Centerline Length (mm) | 376 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.5 |
18779
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.1 |
| Centerline Length (mm) | 358 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.44 |
18782
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.31 |
18785
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.2 |
| Centerline Length (mm) | 589 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.54 |
18786
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.7 |
| Centerline Length (mm) | 450 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.42 |
18789
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.9 |
| Centerline Length (mm) | 404 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.39 |
18791
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.4 |
| Centerline Length (mm) | 188 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2803 |
| Weight (lbs.) | 0.17 |
18792
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.2 |
| Centerline Length (mm) | 132 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.15 |
18793
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.33 |
18796
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.7 |
| Centerline Length (mm) | 246 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.24 |
18797
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.12 |
18798
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.2 |
| Centerline Length (mm) | 259 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.25 |
18799
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 705 |
| Weight (lbs.) | 0.29 |
18801
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.5 |
| Centerline Length (mm) | 191 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.18 |
18802
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.2 |
| Centerline Length (mm) | 284 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.31 |
18803
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.9 |
| Centerline Length (mm) | 404 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.43 |
18804
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.33 |
18805
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.2 |
| Centerline Length (mm) | 284 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.31 |
18806
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.8 |
| Centerline Length (mm) | 503 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.52 |
18812
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.86 |
| Centerline Length (mm) | 327 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.33 |
18813
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.8 |
| Centerline Length (mm) | 249 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.26 |
18814
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 95 |
| Weight (lbs.) | 0.41 |
18819
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.1 |
| Centerline Length (mm) | 409 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.41 |
18821
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.8 |
| Centerline Length (mm) | 274 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.26 |
18822
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.4 |
| Centerline Length (mm) | 290 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.32 |
18826
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.45 |
18827
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.48 |
18830
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.7 |
| Centerline Length (mm) | 399 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 120 |
| Weight (lbs.) | 0.39 |
18831
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.6 |
| Centerline Length (mm) | 422 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.4 |
18836
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.1 |
| Centerline Length (mm) | 485 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.43 |
18838
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 95 |
| Weight (lbs.) | 0.41 |
18840
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.5 |
| Centerline Length (mm) | 775 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.8 |
18843
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.4 |
| Centerline Length (mm) | 569 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.5 |
18844
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22 |
| Centerline Length (mm) | 559 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.51 |
18846
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.8 |
| Centerline Length (mm) | 376 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
18847
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.5 |
18848
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.7 |
| Centerline Length (mm) | 653 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.63 |
18849
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.1 |
| Centerline Length (mm) | 587 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.54 |
18850
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.9 |
| Centerline Length (mm) | 429 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 595 |
| Weight (lbs.) | 0.44 |
18853
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.4 |
| Centerline Length (mm) | 417 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 110 |
| Weight (lbs.) | 0.69 |
18856
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.9 |
| Centerline Length (mm) | 455 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 490 |
| Weight (lbs.) | 0.47 |
18857
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.3 |
| Centerline Length (mm) | 465 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.42 |
18862
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.7 |
| Centerline Length (mm) | 602 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.68 |
18863
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.6 |
| Centerline Length (mm) | 523 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.48 |
18865
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.43 |
18867
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19 |
| Centerline Length (mm) | 483 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.55 |
18868
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.5 |
| Centerline Length (mm) | 572 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.5 |
18873
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.3 |
| Centerline Length (mm) | 312 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.32 |
18874
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.2 |
| Centerline Length (mm) | 411 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.47 |
18875
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.9 |
| Centerline Length (mm) | 404 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.41 |
18876
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.7 |
| Centerline Length (mm) | 678 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 70 |
| Weight (lbs.) | 0.61 |
18877
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.8 |
| Centerline Length (mm) | 554 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.63 |
18881
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.7 |
| Centerline Length (mm) | 602 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.69 |
18883
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.9 |
| Centerline Length (mm) | 505 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.47 |
18885
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 38.4 |
| Centerline Length (mm) | 975 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.93 |
18889
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.9 |
| Centerline Length (mm) | 582 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 75 |
| Weight (lbs.) | 1.04 |
18893
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.1 |
| Centerline Length (mm) | 587 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.03 |
18894
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.2 |
| Centerline Length (mm) | 615 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 70 |
| Weight (lbs.) | 1.08 |
18896
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.2 |
| Centerline Length (mm) | 589 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.53 |
18897
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.1 |
| Centerline Length (mm) | 739 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 1.25 |
18898
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22 |
| Centerline Length (mm) | 559 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.06 |
18899
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17 |
| Centerline Length (mm) | 432 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
18900
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.7 |
| Centerline Length (mm) | 526 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.95 |
18903
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.9 |
| Centerline Length (mm) | 251 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.2 |
18906
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 39.8 |
| Centerline Length (mm) | 1011 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.58 |
18908
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 41.5 |
| Centerline Length (mm) | 1054 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.98 |
18909
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 38.1 |
| Centerline Length (mm) | 968 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.47 |
18911
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.4 |
| Centerline Length (mm) | 671 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.12 |
18912
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.7 |
| Centerline Length (mm) | 602 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 1.08 |
18914
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35 |
| Centerline Length (mm) | 889 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 1.46 |
18915
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 40.9 |
| Centerline Length (mm) | 1039 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 55 |
| Weight (lbs.) | 1.67 |
18916
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.6 |
| Centerline Length (mm) | 930 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.42 |
18919
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.6 |
| Centerline Length (mm) | 371 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.26 |
18920
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15 |
| Centerline Length (mm) | 381 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.28 |
18922
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.1 |
| Centerline Length (mm) | 384 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 160 |
| Weight (lbs.) | 0.28 |
18925
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.7 |
| Centerline Length (mm) | 221 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.16 |
18933
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.9 |
| Centerline Length (mm) | 404 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.39 |
18937
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.2 |
| Centerline Length (mm) | 259 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.2 |
18942
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.3 |
| Centerline Length (mm) | 389 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.3 |
18948
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.4 |
| Centerline Length (mm) | 544 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.4 |
18951
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.6 |
| Centerline Length (mm) | 244 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.8 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.3 |
18952
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.2 |
| Centerline Length (mm) | 361 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 55 |
| Weight (lbs.) | 0.39 |
18955
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.9 |
| Centerline Length (mm) | 175 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.28 |
18957
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.8 |
| Centerline Length (mm) | 325 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.3 |
18959
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.8 |
| Centerline Length (mm) | 630 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.61 |
18962
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
18965
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35 |
| Centerline Length (mm) | 889 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 1 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 195 |
| Weight (lbs.) | 0.97 |
18969
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.8 |
| Centerline Length (mm) | 528 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.51 |
18970
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.6 |
| Centerline Length (mm) | 345 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.29 |
18971
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.5 |
| Centerline Length (mm) | 292 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 75 |
| Weight (lbs.) | 0.34 |
18972
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.8 |
| Centerline Length (mm) | 427 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.42 |
18973
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.2 |
| Centerline Length (mm) | 437 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 95 |
| Weight (lbs.) | 0.37 |
18983
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26 |
| Centerline Length (mm) | 660 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.61 |
18984
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.3 |
| Centerline Length (mm) | 439 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.37 |
18993
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.1 |
| Centerline Length (mm) | 485 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.49 |
18994
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.2 |
| Centerline Length (mm) | 488 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.48 |
18996
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.5 |
| Centerline Length (mm) | 622 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.58 |
18997
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18 |
| Centerline Length (mm) | 457 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.45 |
18998
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.9 |
| Centerline Length (mm) | 505 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.52 |
18999
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.7 |
| Centerline Length (mm) | 678 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 70 |
| Weight (lbs.) | 0.62 |
19001
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.4 |
| Centerline Length (mm) | 569 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 75 |
| Weight (lbs.) | 0.52 |
19004
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.6 |
| Centerline Length (mm) | 726 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 65 |
| Weight (lbs.) | 0.7 |
19005
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.5 |
| Centerline Length (mm) | 241 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 55 |
| Weight (lbs.) | 0.18 |
19008
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.9 |
| Centerline Length (mm) | 251 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.3 |
19015
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.1 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
19019
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.1 |
| Centerline Length (mm) | 206 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.27 |
19021
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.51 |
19022
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.2 |
| Centerline Length (mm) | 132 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.22 |
19023
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.5 |
| Centerline Length (mm) | 343 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
19025
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.1 |
| Centerline Length (mm) | 180 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.16 |
19026
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6 |
| Centerline Length (mm) | 152 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1167 |
| Weight (lbs.) | 0.17 |
19029
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.5 |
| Centerline Length (mm) | 648 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.98 |
19032
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
19033
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.9 |
| Centerline Length (mm) | 378 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.3 |
19034
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.5 |
| Centerline Length (mm) | 495 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.38 |
19035
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.1 |
| Centerline Length (mm) | 155 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.13 |
19037
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21 |
| Centerline Length (mm) | 533 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
19038
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.4 |
| Centerline Length (mm) | 671 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.5 |
19039
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.9 |
| Centerline Length (mm) | 836 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.72 |
19040
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.7 |
| Centerline Length (mm) | 500 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.41 |
19042
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.4 |
| Centerline Length (mm) | 340 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.28 |
19043
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.9 |
| Centerline Length (mm) | 531 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.43 |
19044
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22 |
| Centerline Length (mm) | 559 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.45 |
19045
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31 |
| Centerline Length (mm) | 787 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.63 |
19046
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20 |
| Centerline Length (mm) | 508 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.41 |
19047
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.2 |
| Centerline Length (mm) | 564 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.45 |
19048
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.8 |
| Centerline Length (mm) | 325 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 65 |
| Weight (lbs.) | 0.27 |
19049
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.9 |
| Centerline Length (mm) | 429 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.34 |
19050
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.6 |
| Centerline Length (mm) | 752 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.6 |
19053
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.1 |
| Centerline Length (mm) | 688 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.55 |
19054
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.3 |
| Centerline Length (mm) | 338 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 648 |
| Weight (lbs.) | 0.28 |
19056
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.3 |
| Centerline Length (mm) | 389 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.31 |
19057
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.9 |
| Centerline Length (mm) | 734 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.58 |
19059
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.5 |
| Centerline Length (mm) | 267 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.22 |
19061
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.9 |
| Centerline Length (mm) | 277 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.23 |
19062
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.27 |
19063
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.69 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.39 |
19068
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.7 |
| Centerline Length (mm) | 246 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.2 |
19070
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.8 |
| Centerline Length (mm) | 935 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 260 |
| Weight (lbs.) | 0.9 |
19074
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.9 |
| Centerline Length (mm) | 810 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.64 |
19075
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.4 |
| Centerline Length (mm) | 417 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.44 |
19078
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.7 |
| Centerline Length (mm) | 653 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.51 |
19079
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.5 |
| Centerline Length (mm) | 419 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.45 |
19081
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.9 |
| Centerline Length (mm) | 505 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.45 |
19082
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.6 |
| Centerline Length (mm) | 498 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.39 |
19085
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.2 |
| Centerline Length (mm) | 462 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.54 |
19087
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.6 |
| Centerline Length (mm) | 193 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.16 |
19088
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.4 |
| Centerline Length (mm) | 264 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.22 |
19089
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.7 |
| Centerline Length (mm) | 831 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.66 |
19090
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 33.1 |
| Centerline Length (mm) | 841 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.66 |
19091
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.9 |
| Centerline Length (mm) | 531 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.43 |
19092
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.9 |
| Centerline Length (mm) | 531 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.59 |
19093
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.6 |
| Centerline Length (mm) | 574 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.46 |
19094
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.4 |
| Centerline Length (mm) | 544 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.44 |
19097
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.2 |
| Centerline Length (mm) | 640 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.5 |
19098
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.3 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.42 |
19101
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.2 |
| Centerline Length (mm) | 742 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.58 |
19102
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.4 |
| Centerline Length (mm) | 417 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.34 |
19103
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.4 |
| Centerline Length (mm) | 544 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.43 |
19104
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.5 |
| Centerline Length (mm) | 495 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.39 |
19107
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.2 |
| Centerline Length (mm) | 615 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.49 |
19109
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.7 |
| Centerline Length (mm) | 627 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.58 |
19110
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.7 |
| Centerline Length (mm) | 577 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
19111
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.5 |
| Centerline Length (mm) | 876 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.7 |
19113
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.6 |
| Centerline Length (mm) | 498 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.93 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.4 |
19114
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.9 |
| Centerline Length (mm) | 912 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.71 |
19115
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 42.2 |
| Centerline Length (mm) | 1072 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.83 |
19116
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.41 |
19117
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.41 |
19120
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 632 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.49 |
19121
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.6 |
| Centerline Length (mm) | 574 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.52 |
19125
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20 |
| Centerline Length (mm) | 508 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.35 |
19126
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.4 |
| Centerline Length (mm) | 721 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.57 |
19129
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.42 |
19130
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.4 |
| Centerline Length (mm) | 340 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.28 |
19131
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.6 |
| Centerline Length (mm) | 422 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.36 |
19133
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.8 |
| Centerline Length (mm) | 579 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
19138
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.8 |
| Centerline Length (mm) | 503 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.42 |
19140
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.7 |
| Centerline Length (mm) | 348 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.28 |
19141
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.4 |
| Centerline Length (mm) | 747 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.63 |
19142
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.41 |
19143
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16 |
| Centerline Length (mm) | 406 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.33 |
19144
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 632 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.53 |
19145
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.2 |
| Centerline Length (mm) | 310 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.25 |
19146
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.1 |
| Centerline Length (mm) | 638 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19150
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.9 |
| Centerline Length (mm) | 683 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.56 |
19151
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.5 |
| Centerline Length (mm) | 546 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.47 |
19152
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9 |
| Centerline Length (mm) | 229 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.19 |
19153
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25 |
| Centerline Length (mm) | 635 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.84 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.51 |
19154
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 53.3 |
| Centerline Length (mm) | 1354 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 1.07 |
19155
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25 |
| Centerline Length (mm) | 635 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.51 |
19156
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.5 |
| Centerline Length (mm) | 216 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.18 |
19157
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.5 |
| Centerline Length (mm) | 470 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.39 |
19158
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.8 |
| Centerline Length (mm) | 300 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.26 |
19159
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.3 |
| Centerline Length (mm) | 439 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.94 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.39 |
19160
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.2 |
| Centerline Length (mm) | 615 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.49 |
19161
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.3 |
| Centerline Length (mm) | 617 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.5 |
19166
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.1 |
| Centerline Length (mm) | 384 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.32 |
19167
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.7 |
| Centerline Length (mm) | 399 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.32 |
19168
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.7 |
| Centerline Length (mm) | 500 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.4 |
19173
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.3 |
| Centerline Length (mm) | 211 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.19 |
19175
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.8 |
| Centerline Length (mm) | 325 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.3 |
19176
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.4 |
| Centerline Length (mm) | 391 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.34 |
19178
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.6 |
| Centerline Length (mm) | 574 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.47 |
19181
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.7 |
| Centerline Length (mm) | 526 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.43 |
19183
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.6 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.27 |
19187
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.2 |
| Centerline Length (mm) | 234 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.23 |
19188
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 322 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.31 |
19190
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.28 |
19191
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.96 |
| Centerline Length (mm) | 888 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.68 |
19192
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.8 |
| Centerline Length (mm) | 833 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.67 |
19193
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.3 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.43 |
19195
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.8 |
| Centerline Length (mm) | 528 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.4 |
19196
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 41.9 |
| Centerline Length (mm) | 1064 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.81 |
19198
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.4 |
| Centerline Length (mm) | 874 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.67 |
19199
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.7 |
| Centerline Length (mm) | 551 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.43 |
19200
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 44.7 |
| Centerline Length (mm) | 1135 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.87 |
19201
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 44.2 |
| Centerline Length (mm) | 1123 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.85 |
19203
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.7 |
| Centerline Length (mm) | 450 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.38 |
19206
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.1 |
| Centerline Length (mm) | 917 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.7 |
19207
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.8 |
| Centerline Length (mm) | 630 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19208
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.4 |
| Centerline Length (mm) | 493 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.38 |
19210
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15 |
| Centerline Length (mm) | 381 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.31 |
19211
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.64 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.43 |
19212
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.1 |
| Centerline Length (mm) | 612 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.48 |
19213
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.9 |
| Centerline Length (mm) | 277 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 875 |
| Weight (lbs.) | 0.24 |
19214
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18 |
| Centerline Length (mm) | 457 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.38 |
19215
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.1 |
| Centerline Length (mm) | 536 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.43 |
19218
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 37.7 |
| Centerline Length (mm) | 958 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.75 |
19219
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.9 |
| Centerline Length (mm) | 531 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.94 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.44 |
19223
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.5 |
| Centerline Length (mm) | 749 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.58 |
19224
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.2 |
| Centerline Length (mm) | 538 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.42 |
19227
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.7 |
| Centerline Length (mm) | 500 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.41 |
19228
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14 |
| Centerline Length (mm) | 356 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.3 |
19235
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 43.2 |
| Centerline Length (mm) | 1097 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.84 |
19237
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12 |
| Centerline Length (mm) | 305 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.27 |
19240
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.8 |
| Centerline Length (mm) | 554 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.45 |
19246
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 48.5 |
| Centerline Length (mm) | 1232 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.69 |
19247
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.3 |
| Centerline Length (mm) | 262 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.23 |
19249
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.9 |
| Centerline Length (mm) | 124 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.14 |
19250
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.19 |
19251
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.4 |
| Centerline Length (mm) | 569 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.45 |
19252
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.4 |
| Centerline Length (mm) | 366 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.3 |
19253
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.27 |
19254
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.6 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.27 |
19256
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.8 |
| Centerline Length (mm) | 224 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.21 |
19258
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.5 |
| Centerline Length (mm) | 470 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.39 |
19259
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.47 |
| Centerline Length (mm) | 672 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.53 |
19260
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.4 |
| Centerline Length (mm) | 239 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.22 |
19269
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.4 |
| Centerline Length (mm) | 391 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.32 |
19270
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.7 |
| Centerline Length (mm) | 399 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.33 |
19276
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.78 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.3 |
19277
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.3 |
| Centerline Length (mm) | 566 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.44 |
19279
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.8 |
| Centerline Length (mm) | 274 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.24 |
19282
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.8 |
| Centerline Length (mm) | 605 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.47 |
19284
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.8 |
| Centerline Length (mm) | 274 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.22 |
19286
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.5 |
| Centerline Length (mm) | 673 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.52 |
19287
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.2 |
| Centerline Length (mm) | 564 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.45 |
19288
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18 |
| Centerline Length (mm) | 457 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.35 |
19292
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.8 |
| Centerline Length (mm) | 528 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.42 |
19294
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.3 |
| Centerline Length (mm) | 414 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.34 |
19295
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.5 |
| Centerline Length (mm) | 394 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.32 |
19297
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.1 |
| Centerline Length (mm) | 358 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.3 |
19298
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.2 |
| Centerline Length (mm) | 335 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.28 |
19301
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.1 |
| Centerline Length (mm) | 434 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.35 |
19305
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.1 |
| Centerline Length (mm) | 765 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.58 |
19306
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.2 |
| Centerline Length (mm) | 488 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.39 |
19310
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.6 |
| Centerline Length (mm) | 472 |
| Hose Inside Diameter (in). | 0.66 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.66 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.38 |
19312
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.37 |
19313
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.26 |
19314
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19 |
| Centerline Length (mm) | 483 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.39 |
19315
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.5 |
| Centerline Length (mm) | 292 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.25 |
19316
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.6 |
| Centerline Length (mm) | 295 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.24 |
19317
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.6 |
| Centerline Length (mm) | 752 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.57 |
19320
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.4 |
| Centerline Length (mm) | 620 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
19321
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.7 |
| Centerline Length (mm) | 653 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.64 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.4 |
19322
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.3 |
19325
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.4 |
| Centerline Length (mm) | 239 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.15 |
19329
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.2 |
| Centerline Length (mm) | 691 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.45 |
19332
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.1 |
| Centerline Length (mm) | 536 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.35 |
19333
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.1 |
| Centerline Length (mm) | 180 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.1 |
19335
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.2 |
| Centerline Length (mm) | 691 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19336
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 33.9 |
| Centerline Length (mm) | 861 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.55 |
19337
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.1 |
| Centerline Length (mm) | 765 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.55 |
19338
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.9 |
| Centerline Length (mm) | 759 |
| Hose Inside Diameter (in). | 0.7 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.55 |
19339
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.5 |
| Centerline Length (mm) | 368 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.2 |
19340
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.5 |
| Centerline Length (mm) | 343 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.2 |
19342
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.6 |
| Centerline Length (mm) | 625 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.25 |
19343
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.1 |
| Centerline Length (mm) | 384 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.77 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.29 |
19347
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 632 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.4 |
19353
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.9 |
| Centerline Length (mm) | 658 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.45 |
19355
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.1 |
| Centerline Length (mm) | 460 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.3 |
19356
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20 |
| Centerline Length (mm) | 508 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.35 |
19357
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.4 |
| Centerline Length (mm) | 594 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.4 |
19359
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.2 |
| Centerline Length (mm) | 234 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.15 |
19360
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.6 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.25 |
19361
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.3 |
| Centerline Length (mm) | 338 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.2 |
19362
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.1 |
| Centerline Length (mm) | 536 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.35 |
19363
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.5 |
| Centerline Length (mm) | 368 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.2 |
19364
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.3 |
19368
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.3 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.35 |
19369
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.5 |
| Centerline Length (mm) | 572 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.35 |
19371
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.4 |
| Centerline Length (mm) | 467 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.3 |
19372
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.6 |
| Centerline Length (mm) | 549 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.35 |
19373
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.6 |
| Centerline Length (mm) | 472 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.35 |
19374
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.3 |
| Centerline Length (mm) | 465 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.3 |
19375
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.1 |
| Centerline Length (mm) | 231 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.15 |
19378
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.9 |
| Centerline Length (mm) | 251 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.15 |
19379
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.7 |
| Centerline Length (mm) | 297 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.2 |
19380
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.6 |
| Centerline Length (mm) | 269 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.15 |
19383
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.2 |
| Centerline Length (mm) | 691 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.45 |
19385
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.2 |
| Centerline Length (mm) | 538 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.36 |
19386
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.9 |
| Centerline Length (mm) | 607 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.41 |
19390
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 40.1 |
| Centerline Length (mm) | 1019 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.7 |
19391
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.25 |
19392
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.7 |
| Centerline Length (mm) | 475 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.31 |
19393
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.4 |
| Centerline Length (mm) | 620 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.4 |
19397
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.2 |
| Centerline Length (mm) | 792 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19414
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.8 |
| Centerline Length (mm) | 605 |
| Hose Inside Diameter (in). | 0.66 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.66 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.4 |
19415
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.3 |
| Centerline Length (mm) | 363 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.25 |
19416
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.4 |
| Centerline Length (mm) | 467 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.3 |
19421
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 38.6 |
| Centerline Length (mm) | 980 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.65 |
19422
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.25 |
19425
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.5 |
| Centerline Length (mm) | 470 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.34 |
19429
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 38.3 |
| Centerline Length (mm) | 973 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.74 |
19430
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.8 |
| Centerline Length (mm) | 757 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.55 |
19431
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.2 |
| Centerline Length (mm) | 259 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.18 |
19432
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.8 |
| Centerline Length (mm) | 681 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 210 |
| Weight (lbs.) | 0.49 |
19433
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.1 |
| Centerline Length (mm) | 765 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.51 |
19435
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 33.4 |
| Centerline Length (mm) | 848 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.56 |
19436
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.8 |
| Centerline Length (mm) | 909 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.6 |
19437
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.7 |
| Centerline Length (mm) | 475 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 175 |
| Weight (lbs.) | 0.3 |
19438
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.4 |
| Centerline Length (mm) | 467 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
19439
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 46.3 |
| Centerline Length (mm) | 1176 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.6 |
19440
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 52.7 |
| Centerline Length (mm) | 1339 |
| Hose Inside Diameter (in). | 0.7 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.85 |
19442
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.68 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.35 |
19443
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.1 |
| Centerline Length (mm) | 409 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.25 |
19444
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.2 |
| Centerline Length (mm) | 183 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.15 |
19445
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.8 |
| Centerline Length (mm) | 706 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.45 |
19446
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.8 |
| Centerline Length (mm) | 681 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.55 |
19447
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.4 |
| Centerline Length (mm) | 366 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.25 |
19449
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.1 |
| Centerline Length (mm) | 307 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.03 |
19450
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 39.4 |
| Centerline Length (mm) | 1001 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.7 |
19451
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 42.7 |
| Centerline Length (mm) | 1085 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.76 |
19453
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 47.3 |
| Centerline Length (mm) | 1201 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.85 |
19454
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 44.4 |
| Centerline Length (mm) | 1128 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.78 |
19455
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 46.4 |
| Centerline Length (mm) | 1179 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.8 |
19456
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.5 |
| Centerline Length (mm) | 343 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.24 |
19458
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.9 |
| Centerline Length (mm) | 734 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19460
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.2 |
| Centerline Length (mm) | 742 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.49 |
19469
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.6 |
| Centerline Length (mm) | 523 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.4 |
19473
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.3 |
| Centerline Length (mm) | 541 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.38 |
19478
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.6 |
| Centerline Length (mm) | 320 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.23 |
19479
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.1 |
| Centerline Length (mm) | 257 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.2 |
19480
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.3 |
| Centerline Length (mm) | 338 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.25 |
19481
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.1 |
| Centerline Length (mm) | 688 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.46 |
19482
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 37.4 |
| Centerline Length (mm) | 950 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.6 |
19491
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.4 |
| Centerline Length (mm) | 467 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.32 |
19492
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.7 |
| Centerline Length (mm) | 450 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.31 |
19493
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.36 |
19498
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.66 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.66 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.66 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.21 |
19499
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.4 |
| Centerline Length (mm) | 544 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.34 |
19500
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.23 |
19501
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.5 |
| Centerline Length (mm) | 648 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
19502
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.5 |
| Centerline Length (mm) | 546 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.39 |
19504
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.4 |
| Centerline Length (mm) | 391 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.26 |
19505
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 44.2 |
| Centerline Length (mm) | 1123 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.75 |
19509
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.1 |
| Centerline Length (mm) | 815 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.52 |
19510
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 41.3 |
| Centerline Length (mm) | 1049 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.74 |
19511
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 38.9 |
| Centerline Length (mm) | 988 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.72 |
19514
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.3 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.38 |
19515
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.9 |
| Centerline Length (mm) | 810 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.6 |
19516
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.1 |
| Centerline Length (mm) | 765 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19517
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.1 |
| Centerline Length (mm) | 333 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.25 |
19518
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.1 |
| Centerline Length (mm) | 384 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.25 |
19519
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.7 |
| Centerline Length (mm) | 348 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.25 |
19520
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.2 |
| Centerline Length (mm) | 284 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.65 |
| Inside Diameter 2 (mm) | 17 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.19 |
19523
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.2 |
19524
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.4 |
| Centerline Length (mm) | 493 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.7 |
19526
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.2 |
| Centerline Length (mm) | 335 |
| Hose Inside Diameter (in). | 0.65 |
| Hose Inside Diameter (mm) | 17 |
| Inside Diameter 1 (in) | 0.65 |
| Inside Diameter 1 (mm) | 17 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.24 |
19527
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18 |
| Centerline Length (mm) | 457 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.3 |
19528
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.6 |
| Centerline Length (mm) | 422 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.29 |
19529
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.8 |
| Centerline Length (mm) | 401 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.26 |
19530
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.6 |
| Centerline Length (mm) | 295 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 747 |
| Weight (lbs.) | 0.2 |
19531
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.8 |
| Centerline Length (mm) | 554 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.64 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.36 |
19533
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19 |
| Centerline Length (mm) | 483 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.64 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.32 |
19534
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25 |
| Centerline Length (mm) | 635 |
| Hose Inside Diameter (in). | 0.64 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.64 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.64 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.43 |
19535
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.9 |
| Centerline Length (mm) | 124 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2380 |
| Weight (lbs.) | 0.0813 |
19537
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.6 |
| Centerline Length (mm) | 472 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.31 |
19538
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.8 |
| Centerline Length (mm) | 935 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.62 |
19539
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27 |
| Centerline Length (mm) | 686 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.49 |
19541
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.2 |
| Centerline Length (mm) | 691 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 220 |
| Weight (lbs.) | 0.56 |
19542
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.23 |
19547
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.8 |
| Centerline Length (mm) | 401 |
| Hose Inside Diameter (in). | 0.7 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.29 |
19548
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.7 |
| Centerline Length (mm) | 450 |
| Hose Inside Diameter (in). | 0.7 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.33 |
19549
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.5 |
| Centerline Length (mm) | 368 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.22 |
19550
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.2 |
| Centerline Length (mm) | 691 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.42 |
19551
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.23 |
19552
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.4 |
| Centerline Length (mm) | 493 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.32 |
19553
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5 |
| Centerline Length (mm) | 127 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.09 |
19555
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.2 |
| Centerline Length (mm) | 488 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.31 |
19556
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.23 |
19557
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.4 |
| Centerline Length (mm) | 442 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.29 |
19560
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.1 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.61 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.42 |
19562
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.8 |
| Centerline Length (mm) | 122 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.77 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1682 |
| Weight (lbs.) | 0.05 |
19566
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.1 |
| Centerline Length (mm) | 409 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 519 |
| Weight (lbs.) | 0.28 |
19569
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 46.4 |
| Centerline Length (mm) | 1179 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 151 |
| Weight (lbs.) | 0.84 |
19570
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 47.7 |
| Centerline Length (mm) | 1212 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 151 |
| Weight (lbs.) | 0.82 |
19574
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.23 |
19577
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.5 |
| Centerline Length (mm) | 572 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.7 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 185 |
| Weight (lbs.) | 0.38 |
19578
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.9 |
| Centerline Length (mm) | 759 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.61 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 195 |
| Weight (lbs.) | 0.62 |
19581
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.2 |
| Centerline Length (mm) | 538 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.35 |
19583
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.29 |
19585
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.2 |
| Centerline Length (mm) | 564 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.39 |
19586
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.4 |
| Centerline Length (mm) | 696 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.44 |
19587
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.1 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 130 |
| Weight (lbs.) | 0.34 |
19588
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.7 |
| Centerline Length (mm) | 602 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.62 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.41 |
19590
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 31.7 |
| Centerline Length (mm) | 805 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 130 |
| Weight (lbs.) | 0.54 |
19591
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.7 |
| Centerline Length (mm) | 551 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.38 |
19594
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.29 |
19600
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11 |
| Centerline Length (mm) | 279 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
19601
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.5 |
| Centerline Length (mm) | 343 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 560 |
| Weight (lbs.) | 0.42 |
19602
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.8 |
| Centerline Length (mm) | 528 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.55 |
19603
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.9 |
| Centerline Length (mm) | 201 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.23 |
19604
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.31 |
19605
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.4 |
| Centerline Length (mm) | 239 |
| Hose Inside Diameter (in). | 0.8 |
| Hose Inside Diameter (mm) | 20 |
| Inside Diameter 1 (in) | 0.8 |
| Inside Diameter 1 (mm) | 20 |
| Inside Diameter 2 (in) | 0.8 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.28 |
19606
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.6 |
| Centerline Length (mm) | 295 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 910 |
| Weight (lbs.) | 0.32 |
19607
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.1 |
| Centerline Length (mm) | 180 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.21 |
19609
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.6 |
| Centerline Length (mm) | 574 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 90 |
| Weight (lbs.) | 0.57 |
19610
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.42 |
19611
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.9 |
| Centerline Length (mm) | 531 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.59 |
19613
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.1 |
| Centerline Length (mm) | 587 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.61 |
19614
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 70 |
| Weight (lbs.) | 0.55 |
19615
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 40 |
| Centerline Length (mm) | 1016 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.84 |
19622
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.35 |
19623
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.5 |
| Centerline Length (mm) | 445 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.51 |
19624
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.1 |
| Centerline Length (mm) | 460 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.52 |
19625
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.6 |
| Centerline Length (mm) | 269 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.39 |
19627
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.52 |
19628
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19 |
| Centerline Length (mm) | 483 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.62 |
19629
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.1 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 75 |
| Weight (lbs.) | 0.53 |
19630
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.2 |
| Centerline Length (mm) | 462 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.53 |
19632
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.7 |
| Centerline Length (mm) | 551 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.59 |
19633
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.6 |
| Centerline Length (mm) | 345 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 120 |
| Weight (lbs.) | 0.37 |
19636
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.5 |
| Centerline Length (mm) | 343 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.38 |
19645
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.3 |
| Centerline Length (mm) | 389 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 120 |
| Weight (lbs.) | 0.32 |
19650
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.1 |
| Centerline Length (mm) | 434 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.34 |
19652
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.5 |
| Centerline Length (mm) | 419 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 80 |
| Weight (lbs.) | 0.36 |
19658
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.8 |
| Centerline Length (mm) | 173 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.27 |
19659
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 65 |
| Weight (lbs.) | 0.35 |
19661
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 4.3 |
| Centerline Length (mm) | 109 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.16 |
19663
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 43.3 |
| Centerline Length (mm) | 1100 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 1 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.23 |
19665
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.9 |
| Centerline Length (mm) | 353 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.42 |
19666
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 55 |
| Weight (lbs.) | 0.4 |
19670
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6.9 |
| Centerline Length (mm) | 175 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.19 |
19672
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.7 |
| Centerline Length (mm) | 272 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.24 |
19673
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.6 |
| Centerline Length (mm) | 345 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.1 |
19674
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 45 |
| Weight (lbs.) | 0.55 |
19676
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.7 |
| Centerline Length (mm) | 424 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.98 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.44 |
19679
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 3 |
| Centerline Length (mm) | 76 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.85 |
| Inside Diameter 2 (mm) | 22 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.11 |
19682
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.5 |
| Centerline Length (mm) | 826 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 1.0 |
19684
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.5 |
| Centerline Length (mm) | 394 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.31 |
19690
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.4 |
| Centerline Length (mm) | 315 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.29 |
19691
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.2 |
| Centerline Length (mm) | 361 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.32 |
19692
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.3 |
| Centerline Length (mm) | 389 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
19695
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.34 |
19697
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.51 |
19699
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.8 |
| Centerline Length (mm) | 554 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.51 |
19700
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.6 |
| Centerline Length (mm) | 295 |
| Hose Inside Diameter (in). | 0.77 |
| Hose Inside Diameter (mm) | 20 |
| Inside Diameter 1 (in) | 0.77 |
| Inside Diameter 1 (mm) | 20 |
| Inside Diameter 2 (in) | 0.77 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 60 |
| Weight (lbs.) | 0.29 |
19703
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.3 |
| Centerline Length (mm) | 490 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.52 |
19704
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.53 |
19705
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.29 |
19706
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.4 |
| Centerline Length (mm) | 417 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.95 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.41 |
19707
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 23.8 |
| Centerline Length (mm) | 605 |
| Hose Inside Diameter (in). | 0.71 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 148 |
| Weight (lbs.) | 0.78 |
19708
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.3 |
| Centerline Length (mm) | 312 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
19709
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.6 |
| Centerline Length (mm) | 345 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.34 |
19713
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.5 |
| Centerline Length (mm) | 241 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.23 |
19714
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Hose Inside Diameter (in). | 0.71 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.28 |
19718
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.9 |
| Centerline Length (mm) | 226 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.22 |
19719
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 39 |
| Centerline Length (mm) | 991 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.91 |
| Inside Diameter 2 (mm) | 23 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.87 |
19723
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.1 |
| Centerline Length (mm) | 485 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.44 |
19724
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
19726
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.3 |
| Centerline Length (mm) | 693 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 1 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.68 |
19727
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.29 |
19728
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.2 |
| Centerline Length (mm) | 234 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.23 |
19729
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.5 |
| Centerline Length (mm) | 267 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.31 |
19733
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.1 |
| Centerline Length (mm) | 384 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.35 |
19734
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.3 |
| Centerline Length (mm) | 465 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.42 |
19735
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.2 |
| Centerline Length (mm) | 310 |
| Hose Inside Diameter (in). | 0.61 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.78 |
| Inside Diameter 1 (mm) | 20 |
| Inside Diameter 2 (in) | 0.78 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.34 |
19736
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.5 |
| Centerline Length (mm) | 191 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1050 |
| Weight (lbs.) | 0.19 |
19737
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.7 |
| Centerline Length (mm) | 196 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.19 |
19739
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.5 |
| Centerline Length (mm) | 241 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.3 |
19743
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13 |
| Centerline Length (mm) | 330 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.92 |
| Inside Diameter 2 (mm) | 23 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.32 |
19744
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.8 |
| Centerline Length (mm) | 427 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.4 |
19746
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.6 |
| Centerline Length (mm) | 574 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.55 |
19747
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.7 |
| Centerline Length (mm) | 373 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.37 |
19749
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.4 |
| Centerline Length (mm) | 213 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.25 |
19750
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.7 |
| Centerline Length (mm) | 348 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.35 |
19751
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.5 |
| Centerline Length (mm) | 419 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.51 |
19752
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.4 |
| Centerline Length (mm) | 493 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.49 |
19753
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7 |
| Centerline Length (mm) | 178 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.22 |
19754
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.7 |
| Centerline Length (mm) | 424 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.41 |
19755
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 34.6 |
| Centerline Length (mm) | 879 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.95 |
19756
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.4 |
| Centerline Length (mm) | 925 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.83 |
19759
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.3 |
| Centerline Length (mm) | 617 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.55 |
19760
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.3 |
| Centerline Length (mm) | 617 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.55 |
19761
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 30.7 |
| Centerline Length (mm) | 780 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.88 |
19762
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.5 |
| Centerline Length (mm) | 673 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.6 |
19764
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.4 |
| Centerline Length (mm) | 366 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.36 |
19765
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 37.9 |
| Centerline Length (mm) | 963 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.87 |
19766
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.9 |
| Centerline Length (mm) | 455 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.44 |
19768
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.1 |
| Centerline Length (mm) | 206 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.22 |
19771
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.4 |
| Centerline Length (mm) | 493 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.44 |
19773
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.1 |
| Centerline Length (mm) | 485 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.43 |
19779
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.99 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
19782
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.6 |
| Centerline Length (mm) | 396 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.99 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.51 |
19785
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.1 |
| Centerline Length (mm) | 282 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.28 |
19789
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.7 |
| Centerline Length (mm) | 450 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.42 |
19790
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.1 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.47 |
19791
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.9 |
| Centerline Length (mm) | 632 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.6 |
19793
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.6 |
| Centerline Length (mm) | 447 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.43 |
19794
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 7.8 |
| Centerline Length (mm) | 198 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.96 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.22 |
19796
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.1 |
| Centerline Length (mm) | 130 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.17 |
19798
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.96 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 35 |
| Weight (lbs.) | 0.45 |
19800
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.2 |
| Centerline Length (mm) | 437 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.4 |
19802
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 5.1 |
| Centerline Length (mm) | 130 |
| Hose Inside Diameter (in). | 0.87 |
| Hose Inside Diameter (mm) | 22 |
| Inside Diameter 1 (in) | 0.87 |
| Inside Diameter 1 (mm) | 22 |
| Inside Diameter 2 (in) | 1 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.19 |
19803
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.5 |
| Centerline Length (mm) | 292 |
| Hose Inside Diameter (in). | 0.77 |
| Hose Inside Diameter (mm) | 20 |
| Inside Diameter 1 (in) | 0.77 |
| Inside Diameter 1 (mm) | 20 |
| Inside Diameter 2 (in) | 0.77 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.29 |
19805
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.8 |
| Centerline Length (mm) | 579 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.95 |
| Inside Diameter 2 (mm) | 24 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.54 |
19806
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.5 |
| Centerline Length (mm) | 267 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.25 |
19811
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.2 |
| Centerline Length (mm) | 462 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.42 |
19812
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32.7 |
| Centerline Length (mm) | 831 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25 |
| Inside Diameter 1 (in) | 1 |
| Inside Diameter 1 (mm) | 25 |
| Inside Diameter 2 (in) | 1 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 105 |
| Weight (lbs.) | 1.13 |
19813
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.5 |
| Centerline Length (mm) | 902 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.79 |
19814
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.4 |
| Centerline Length (mm) | 899 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.77 |
19815
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.9 |
| Centerline Length (mm) | 378 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.34 |
19816
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.1 |
| Centerline Length (mm) | 485 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.43 |
19817
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.4 |
19818
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.9 |
| Centerline Length (mm) | 505 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.45 |
19819
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.8 |
| Centerline Length (mm) | 452 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.42 |
19820
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.9 |
| Centerline Length (mm) | 505 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.46 |
19821
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14 |
| Centerline Length (mm) | 356 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.34 |
19822
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.1 |
| Centerline Length (mm) | 257 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.26 |
19824
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.7 |
| Centerline Length (mm) | 424 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 525 |
| Weight (lbs.) | 0.38 |
19825
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.2 |
| Centerline Length (mm) | 361 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 1.01 |
| Inside Diameter 2 (mm) | 26 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.62 |
19826
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.4 |
| Centerline Length (mm) | 442 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.35 |
19829
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20 |
| Centerline Length (mm) | 508 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.4 |
19830
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.6 |
| Centerline Length (mm) | 523 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 20 |
| Weight (lbs.) | 0.4 |
19831
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.2 |
| Centerline Length (mm) | 462 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.4 |
19832
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.35 |
| Centerline Length (mm) | 669 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.5 |
19833
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.3 |
| Centerline Length (mm) | 516 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.35 |
19834
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.4 |
| Centerline Length (mm) | 239 |
| Hose Inside Diameter (in). | 0.76 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.76 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.76 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.2 |
19838
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.4 |
| Centerline Length (mm) | 417 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.79 |
| Inside Diameter 2 (mm) | 20 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.35 |
19839
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 38.1 |
| Centerline Length (mm) | 968 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.73 |
19843
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.8 |
| Centerline Length (mm) | 427 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.42 |
19844
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 22.5 |
| Centerline Length (mm) | 572 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.45 |
19845
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.26 |
19846
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 32 |
| Centerline Length (mm) | 813 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.65 |
19847
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.6 |
| Centerline Length (mm) | 218 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.18 |
19848
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.8 |
| Centerline Length (mm) | 376 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.32 |
19849
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.8 |
| Centerline Length (mm) | 630 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.49 |
19850
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.6 |
| Centerline Length (mm) | 345 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.27 |
19851
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.8 |
| Centerline Length (mm) | 249 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.82 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 15 |
| Weight (lbs.) | 0.21 |
19864
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.6 |
| Centerline Length (mm) | 549 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 30 |
| Weight (lbs.) | 0.4 |
19865
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.1 |
| Centerline Length (mm) | 688 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.54 |
19866
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.1 |
| Centerline Length (mm) | 511 |
| Hose Inside Diameter (in). | 0.9 |
| Hose Inside Diameter (mm) | 23 |
| Inside Diameter 1 (in) | 0.9 |
| Inside Diameter 1 (mm) | 23 |
| Inside Diameter 2 (in) | 1.2 |
| Inside Diameter 2 (mm) | 30 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.55 |
19870
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 16.8 |
| Centerline Length (mm) | 427 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.4 |
19872
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.2 |
| Centerline Length (mm) | 386 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.32 |
19876
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.8 |
| Centerline Length (mm) | 732 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.54 |
19877
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 27.6 |
| Centerline Length (mm) | 701 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.53 |
19878
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.4 |
| Centerline Length (mm) | 290 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 |
| Weight (lbs.) | 0.22 |
19879
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.28 |
19880
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 35.2 |
| Centerline Length (mm) | 894 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 25 |
| Weight (lbs.) | 0.65 |
19883
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 36.5 |
| Centerline Length (mm) | 927 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 120 |
| Weight (lbs.) | 0.78 |
19885
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.7 |
| Centerline Length (mm) | 551 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
19886
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.6 |
| Centerline Length (mm) | 523 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 40 |
| Weight (lbs.) | 0.33 |
19888
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 29.5 |
| Centerline Length (mm) | 749 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.97 |
| Inside Diameter 2 (mm) | 25 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 148 |
| Weight (lbs.) | 0.87 |
19889
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.3 |
| Centerline Length (mm) | 668 |
| Hose Inside Diameter (in). | 0.62 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.62 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 389 |
| Weight (lbs.) | 0.58 |
19890
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.8 |
| Centerline Length (mm) | 528 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.36 |
19892
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.7 |
| Centerline Length (mm) | 475 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 389 |
| Weight (lbs.) | 0.36 |
19893
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 12.2 |
| Centerline Length (mm) | 310 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 841 |
| Weight (lbs.) | 0.26 |
19894
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.9 |
| Centerline Length (mm) | 404 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 389 |
| Weight (lbs.) | 0.32 |
19897
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.6 |
| Centerline Length (mm) | 726 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 250 |
| Weight (lbs.) | 0.45 |
19898
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.4 |
| Centerline Length (mm) | 721 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 250 |
| Weight (lbs.) | 0.44 |
19900
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 26.5 |
| Centerline Length (mm) | 673 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.41 |
19901
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 28.9 |
| Centerline Length (mm) | 734 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 250 |
| Weight (lbs.) | 0.34 |
19905
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14 |
| Centerline Length (mm) | 356 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 648 |
| Weight (lbs.) | 0.26 |
19906
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.5 |
| Centerline Length (mm) | 495 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.36 |
19907
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.5 |
| Centerline Length (mm) | 241 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 841 |
| Weight (lbs.) | 0.19 |
19908
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.71 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 841 |
| Weight (lbs.) | 0.23 |
19909
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.8 |
| Centerline Length (mm) | 249 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 841 |
| Weight (lbs.) | 0.21 |
19910
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.9 |
| Centerline Length (mm) | 302 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.73 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 841 |
| Weight (lbs.) | 0.24 |
19911
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.4 |
| Centerline Length (mm) | 518 |
| Hose Inside Diameter (in). | 0.71 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.71 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.71 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 324 |
| Weight (lbs.) | 0.41 |
19912
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.8 |
| Centerline Length (mm) | 478 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 561 |
| Weight (lbs.) | 0.42 |
19913
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 14.21 |
| Centerline Length (mm) | 361 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.28 |
19914
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21.5 |
| Centerline Length (mm) | 546 |
| Hose Inside Diameter (in). | 0.74 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.74 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.74 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.43 |
19915
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 17.74 |
| Centerline Length (mm) | 451 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.84 |
| Inside Diameter 2 (mm) | 21 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 370 |
| Weight (lbs.) | 0.32 |
19916
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 18.6 |
| Centerline Length (mm) | 472 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 377 |
| Weight (lbs.) | 0.39 |
19917
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.2 |
| Centerline Length (mm) | 615 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 302 |
| Weight (lbs.) | 0.46 |
19918
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.8 |
| Centerline Length (mm) | 274 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 841 |
| Weight (lbs.) | 0.29 |
19919
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.3 |
| Centerline Length (mm) | 643 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 377 |
| Weight (lbs.) | 0.54 |
19920
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.2 |
| Centerline Length (mm) | 208 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 980 |
| Weight (lbs.) | 0.18 |
19921
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25 |
| Centerline Length (mm) | 635 |
| Hose Inside Diameter (in). | 0.72 |
| Hose Inside Diameter (mm) | 18 |
| Inside Diameter 1 (in) | 0.72 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.72 |
| Inside Diameter 2 (mm) | 18 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 151 |
| Weight (lbs.) | 0.55 |
19929
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 2.89 |
| Centerline Length (mm) | 73 |
| Hose Inside Diameter (in). | 0.44 |
| Hose Inside Diameter (mm) | 11 |
| Inside Diameter 1 (in) | 0.44 |
| Inside Diameter 1 (mm) | 11 |
| Inside Diameter 2 (in) | 0.44 |
| Inside Diameter 2 (mm) | 11 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 5600 |
| Weight (lbs.) | 0.03 |
19936
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 24.75 |
| Centerline Length (mm) | 629 |
| Hose Inside Diameter (in). | 0.3 |
| Hose Inside Diameter (mm) | 8 |
| Inside Diameter 1 (in) | 0.3 |
| Inside Diameter 1 (mm) | 8 |
| Inside Diameter 2 (in) | 0.3 |
| Inside Diameter 2 (mm) | 8 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.16 |
19942
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 9.78 |
| Centerline Length (mm) | 248 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.16 |
19943
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 10.87 |
| Centerline Length (mm) | 276 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.18 |
19954
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.12 |
| Centerline Length (mm) | 206 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.13 |
19962
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 25.8 |
| Centerline Length (mm) | 655 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 280 |
| Weight (lbs.) | 0.43 |
19963
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 15.74 |
| Centerline Length (mm) | 400 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 560 |
| Weight (lbs.) | 0.28 |
19965
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20.72 |
| Centerline Length (mm) | 526 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.38 |
19967
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 20 |
| Centerline Length (mm) | 508 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.33 |
19968
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 19.06 |
| Centerline Length (mm) | 484 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 16 |
| Inside Diameter 1 (in) | 0.63 |
| Inside Diameter 1 (mm) | 16 |
| Inside Diameter 2 (in) | 0.63 |
| Inside Diameter 2 (mm) | 16 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.31 |
19969
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 11.75 |
| Centerline Length (mm) | 298 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM, Plastic |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.23 |
19971
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 21 |
| Centerline Length (mm) | 533 |
| Hose Inside Diameter (in). | 0.73 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.73 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.9 |
| Inside Diameter 2 (mm) | 23 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 999 |
| Weight (lbs.) | 0.41 |
19997
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 6 |
| Centerline Length (mm) | 152 |
| Hose Inside Diameter (in). | 0.59 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.59 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.59 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 2100 |
| Weight (lbs.) | 0.07 |
19998
| Number of Branches | 0 |
|---|---|
| Centerline Length (in) | 8.23 |
| Centerline Length (mm) | 209 |
| Hose Inside Diameter (in). | 0.6 |
| Hose Inside Diameter (mm) | 15 |
| Inside Diameter 1 (in) | 0.6 |
| Inside Diameter 1 (mm) | 15 |
| Inside Diameter 2 (in) | 0.6 |
| Inside Diameter 2 (mm) | 15 |
| Material | EPDM |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Notes | Molded |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 1400 |
| Weight (lbs.) | 0.11 |
19999
| Centerline Length (in) | 16.3 |
|---|---|
| Centerline Length (mm) | 414 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19 |
| Inside Diameter 1 (in) | 0.75 |
| Inside Diameter 1 (mm) | 19 |
| Inside Diameter 2 (in) | 0.75 |
| Inside Diameter 2 (mm) | 19 |
| Material | EPDM |
| Notes | Molded |
51403
| Contains Spring | false |
|---|---|
| Number of Branches | 0 |
| Modular Hose | false |
| Centerline Length (in) | 21 |
| Centerline Length (mm) | 533 |
| Inside Diameter 1 (in) | 0.7 |
| Inside Diameter 1 (mm) | 18 |
| Inside Diameter 2 (in) | 0.9 |
| Inside Diameter 2 (mm) | 23 |
| Material | EPDM |
| Notes | Molded |
42572682
No variation attributes.
42572710
No variation attributes.
42572719
No variation attributes.
42572681
No variation attributes.
42572718
No variation attributes.
42572656
No variation attributes.
42572651
No variation attributes.
42572675
No variation attributes.
42572680
No variation attributes.
42572724
No variation attributes.
Specifications
| Centerline Length (in) | 2.76 – 63.6 |
|---|---|
| Centerline Length (mm) | 70 – 6325 |
| Inside Diameter 1 (in) | 0.23 – 1.84 |
| Inside Diameter 1 (mm) | 6 – 47 |
| Inside Diameter 2 (in) | 0.23 – 1.84 |
| Inside Diameter 2 (mm) | 6 – 47 |
| Material | EPDM, EPDM, Steel, EPDM, Plastic, Steel, EPDM, Plastic |
| Notes | Molded |
| Hose Inside Diameter (in). | 0.23 – 1.12 |
| Hose Inside Diameter (mm) | 6 – 28 |
| Number of Branches | 0 |
| Automotive Notes | Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip® SB Clamps each time a new coolant hose is installed. |
| Caution | Do not use for fuel or oil transfer applications. |
| Customer Pack | 10 – 5950 |
| Weight (lbs.) | 0.03 – 9.9 |
| Inside Diameter 3 (in) | 0.5 |
| Inside Diameter 3 (mm) | 13 |
| Inside Diameter 4 (in) | 0.5 |
| Inside Diameter 4 (mm) | 13 |
| Inside Diameter (in) | 0.52 |
| Inside Diameter (mm) | 13 |
| Contains Spring | false |
| Modular Hose | false |
PDF Documents
No PDF documents.