Attributes
| Part Number | 4175-000000-000001 |
|---|
Description
Standard Coolant Hose RECOMMENDED FOR: Engine coolant hose such as radiator and heater hoses or connectors. Also suitable for air and water. CAUTION: Not for conveying fuel and oil. Heat and ozone resistant. Meets SAE 20R1 EC Class D2, standard wall. Wall thickness is 4.95 +/– 0.65mm (0.195 +/– 0.25") excluding lap area.
Keeping it Cool. Effective and dependable coolant hose performance is critical to keeping your engine at optimal temperatures. If your coolant hose fails, the leakage can cause significant, expensive damage to your engine system. That's why we've engineered our engine coolant hoses with EPDM and spiral reinforcement for high temperature, corrosion, and wear resistance, so you can drive with the confidence of a strong, consistent, and reliable cooling system.
Inspecting Your Coolant Hose. As part of our Be System Part initiative, we recommend regularly inspecting your critical vehicle systems, including your cooling system and hoses, at around 60,000 miles. As your coolant hose begins to age, the constant transfer of chemical fluids will corrode your hose from the inside out. When inspecting your coolant hose, there are a few simple signs that it's ready for replacement: Press for Soft Spots. The radiator hose is naturally rigid, and any soft spots along the hose body indicates the inner material has begun to break down. Firmly press on the hose body to feel for potential deteriorations. Check the Ends and Fittings. Look for cracks around the hose end, especially near the hose clamps. Feel for Bulges. Run your hands along the hose body to feel for protruding materials, which indicate a rupture within the hose that will eventually lead to failure.
Variations (46)
1 1/8X3 4 75W
No variation attributes.
1 3/4X3 4 75W
No variation attributes.
1 5/8X3 4
No variation attributes.
1-1/2X50 4175EC COOL 100
| Vacuum (In. Hg) | 3 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Hose Inside Diameter (in). | 1.5 |
| Hose Inside Diameter (mm) | 38.1 |
| Hose Outside Diameter (in) | 1.89 |
| Hose Outside Diameter (mm) | 48 |
| Inside Diameter (in) | 1.50 |
| Inside Diameter (mm) | 38.1 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 100 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.89 |
| Outside Diameter (mm) | 38.1 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.6 |
1-1/4X50 4175EC COOL 100
| Vacuum (In. Hg) | 5 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Hose Inside Diameter (in). | 1.25 |
| Hose Inside Diameter (mm) | 31.8 |
| Hose Outside Diameter (in) | 1.64 |
| Hose Outside Diameter (mm) | 41.7 |
| Inside Diameter (in) | 1.25 |
| Inside Diameter (mm) | 31.8 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 100 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.64 |
| Outside Diameter (mm) | 31.8 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.51 |
1-1/8X50 4175EC COOL 125
| Vacuum (In. Hg) | 6 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Hose Inside Diameter (in). | 1.13 |
| Hose Inside Diameter (mm) | 28.6 |
| Hose Outside Diameter (in) | 1.52 |
| Hose Outside Diameter (mm) | 38.6 |
| Inside Diameter (in) | 1.13 |
| Inside Diameter (mm) | 28.6 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 125 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.52 |
| Outside Diameter (mm) | 28.6 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.47 |
1-3/4X50 4175EC COOL 75
| Vacuum (In. Hg) | 1 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 15 |
| Minimum Bend Radius (mm) | 381 |
| Hose Inside Diameter (in). | 1.75 |
| Hose Inside Diameter (mm) | 44.5 |
| Hose Outside Diameter (in) | 2.14 |
| Hose Outside Diameter (mm) | 54.4 |
| Inside Diameter (in) | 1.75 |
| Inside Diameter (mm) | 44.5 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 75 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.14 |
| Outside Diameter (mm) | 44.5 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.67 |
1-3/8X50 4175EC COOL 100
| Vacuum (In. Hg) | 4 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Min. Burst Pressure (psi) | 400 |
| Hose Inside Diameter (in). | 1.38 |
| Hose Inside Diameter (mm) | 34.9 |
| Hose Outside Diameter (in) | 1.76 |
| Hose Outside Diameter (mm) | 44.7 |
| Inside Diameter (in) | 1.38 |
| Inside Diameter (mm) | 34.9 |
| Working Pressure (psi) | 100 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.76 |
| Outside Diameter (mm) | 34.9 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.56 |
1-5/8X50 4175EC COOL 88
| Vacuum (In. Hg) | 2 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 15 |
| Minimum Bend Radius (mm) | 381 |
| Hose Inside Diameter (in). | 1.63 |
| Hose Inside Diameter (mm) | 41.3 |
| Hose Outside Diameter (in) | 2.02 |
| Hose Outside Diameter (mm) | 51.3 |
| Inside Diameter (in) | 1.63 |
| Inside Diameter (mm) | 41.3 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 88 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.02 |
| Outside Diameter (mm) | 41.3 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.63 |
1-7/8X50 4175EC COOL 75
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 1.88 |
| Hose Inside Diameter (mm) | 47.6 |
| Hose Outside Diameter (in) | 2.26 |
| Hose Outside Diameter (mm) | 57.4 |
| Inside Diameter (in) | 1.88 |
| Inside Diameter (mm) | 47.6 |
| Working Pressure (psi) | 75 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.26 |
| Outside Diameter (mm) | 47.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.72 |
1X3 75W
No variation attributes.
1X50 4175EC COOL 138
| Vacuum (In. Hg) | 7 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 550 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.39 |
| Hose Outside Diameter (mm) | 35.3 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 138 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.39 |
| Outside Diameter (mm) | 25.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.42 |
2 7/8X3
No variation attributes.
2-1/2X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Hose Inside Diameter (in). | 2.5 |
| Hose Inside Diameter (mm) | 63.5 |
| Hose Outside Diameter (in) | 2.89 |
| Hose Outside Diameter (mm) | 73.4 |
| Inside Diameter (in) | 2.50 |
| Inside Diameter (mm) | 63.5 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.89 |
| Outside Diameter (mm) | 63.5 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.92 |
2-1/4X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 250 |
| Hose Inside Diameter (in). | 2.25 |
| Hose Inside Diameter (mm) | 57.2 |
| Hose Outside Diameter (in) | 2.64 |
| Hose Outside Diameter (mm) | 67.1 |
| Inside Diameter (in) | 2.25 |
| Inside Diameter (mm) | 57.2 |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.64 |
| Outside Diameter (mm) | 57.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.84 |
2-1/8X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 248 |
| Hose Inside Diameter (in). | 2.13 |
| Hose Inside Diameter (mm) | 54 |
| Hose Outside Diameter (in) | 2.52 |
| Hose Outside Diameter (mm) | 64 |
| Inside Diameter (in) | 2.13 |
| Inside Diameter (mm) | 54 |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.52 |
| Outside Diameter (mm) | 54 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.79 |
2-3/4X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 248 |
| Hose Inside Diameter (in). | 2.75 |
| Hose Inside Diameter (mm) | 69.9 |
| Hose Outside Diameter (in) | 3.14 |
| Hose Outside Diameter (mm) | 79.8 |
| Inside Diameter (in) | 2.75 |
| Inside Diameter (mm) | 69.9 |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 3.14 |
| Outside Diameter (mm) | 69.9 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.0 |
2-3/8X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 248 |
| Hose Inside Diameter (in). | 2.38 |
| Hose Inside Diameter (mm) | 60.3 |
| Hose Outside Diameter (in) | 2.76 |
| Hose Outside Diameter (mm) | 70.1 |
| Inside Diameter (in) | 2.38 |
| Inside Diameter (mm) | 60.3 |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.76 |
| Outside Diameter (mm) | 60.3 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.88 |
2-5/8X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 248 |
| Hose Inside Diameter (in). | 2.63 |
| Hose Inside Diameter (mm) | 66.7 |
| Hose Outside Diameter (in) | 3.02 |
| Hose Outside Diameter (mm) | 76.7 |
| Inside Diameter (in) | 2.63 |
| Inside Diameter (mm) | 66.7 |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 3.02 |
| Outside Diameter (mm) | 66.7 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.96 |
2-7/8X50 4175EC COOL 56
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 224 |
| Hose Inside Diameter (in). | 2.88 |
| Hose Inside Diameter (mm) | 73 |
| Hose Outside Diameter (in) | 3.26 |
| Hose Outside Diameter (mm) | 82.8 |
| Inside Diameter (in) | 2.88 |
| Inside Diameter (mm) | 73 |
| Working Pressure (psi) | 56 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 3.26 |
| Outside Diameter (mm) | 73 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.05 |
2X50 4175EC COOL 62
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.39 |
| Hose Outside Diameter (mm) | 60.7 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 62 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.39 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.76 |
3 1/2X3 4 75W
No variation attributes.
3 3/4X3
No variation attributes.
3-1/2X50 4175EC COOL 18
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Hose Inside Diameter (in). | 3.5 |
| Hose Inside Diameter (mm) | 88.9 |
| Hose Outside Diameter (in) | 3.89 |
| Hose Outside Diameter (mm) | 98.8 |
| Inside Diameter (in) | 3.50 |
| Inside Diameter (mm) | 88.9 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 18 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 3.89 |
| Outside Diameter (mm) | 88.9 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.18 |
3/4X50 4175EC COOL 80
| Vacuum (In. Hg) | 8 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 320 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.14 |
| Hose Outside Diameter (mm) | 29 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 80 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.14 |
| Outside Diameter (mm) | 19.1 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.37 |
3X3 4 75W
No variation attributes.
3X50 4175EC COOL 50
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 200 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.39 |
| Hose Outside Diameter (mm) | 86.1 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 50 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 3.39 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.09 |
4 1/2X3 4 75W
No variation attributes.
4 1/2X50 4175EC COOL 12
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 48 |
| Hose Inside Diameter (in). | 4.5 |
| Hose Inside Diameter (mm) | 114.3 |
| Hose Outside Diameter (in) | 4.89 |
| Hose Outside Diameter (mm) | 124.2 |
| Inside Diameter (in) | 4.5 |
| Inside Diameter (mm) | 114.3 |
| Working Pressure (psi) | 12 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 4.89 |
| Outside Diameter (mm) | 114.3 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.52 |
4X3 4 75W
No variation attributes.
4X50 4175EC COOL 12
| Continuous Operating Temperature Range | -40°F to +257°F |
|---|---|
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Min. Burst Pressure (psi) | 48 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.39 |
| Hose Outside Diameter (mm) | 111.5 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 12 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 4.39 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.34 |
7/8X50 4175EC COOL 75
| Vacuum (In. Hg) | 7 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 7 |
| Minimum Bend Radius (mm) | 178 |
| Hose Inside Diameter (in). | 0.88 |
| Hose Inside Diameter (mm) | 22.2 |
| Hose Outside Diameter (in) | 1.26 |
| Hose Outside Diameter (mm) | 32 |
| Inside Diameter (in) | 0.88 |
| Inside Diameter (mm) | 22.2 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 75 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.26 |
| Outside Diameter (mm) | 22.2 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.39 |
6X50 75W
| Minimum Bend Radius (in) | 0 |
|---|---|
| Minimum Bend Radius (mm) | 0 |
| Inside Diameter (in) | 6 |
| Inside Diameter (mm) | 152.4 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 12 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 6.42 |
| Outside Diameter (mm) | 152.4 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards: Cover | ARPM Class C |
0702617
No variation attributes.
360931
No variation attributes.
41750026
No variation attributes.
41750005
No variation attributes.
41750011
No variation attributes.
41750015
No variation attributes.
41750027
No variation attributes.
41750006
No variation attributes.
41750013
No variation attributes.
41750028
No variation attributes.
41750023
No variation attributes.
41750025
No variation attributes.
41750021
No variation attributes.
Specifications
| Vacuum (In. Hg) | 1 – 8 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 0 – 15 |
| Minimum Bend Radius (mm) | 0 – 381 |
| Hose Inside Diameter (in). | 0.75 – 4.5 |
| Hose Inside Diameter (mm) | 19.1 – 114.3 |
| Hose Outside Diameter (in) | 1.14 – 4.89 |
| Hose Outside Diameter (mm) | 29 – 124.2 |
| Inside Diameter (in) | 0.75 – 6 |
| Inside Diameter (mm) | 19.1 – 152.4 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 12 – 138 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 1.14 – 6.42 |
| Outside Diameter (mm) | 19.1 – 152.4 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM - Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM - Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 0.37 – 1.52 |
| Min. Burst Pressure (psi) | 48 – 550 |
PDF Documents
No PDF documents.