Attributes
| Part Number | 4230-000000-000043 |
|---|
Description
Molded Small I.D. Coolant Hose RECOMMENDED FOR: Engine coolant hose such as cab heater or oil cooler. Also suitable for air or water. CAUTION: Not for conveying fuel and oil. Also suitable for air or water. Limited oil resistance.
Gates Gets Your Vehicles Back On The Road. And Keeps Them There. Gates® engineers our automotive aftermarket parts in partnership with the top OEMs around the world, so you can trust premium-grade automotive and light truck parts that are built to last.
OE Quality for the Aftermarket. Our long-standing partnerships with automotive OEMs on production vehicles enable us to produce aftermarket parts of superior quality, durability, and performance. That experience goes into every Gates® aftermarket engine hose and accessory, bringing a range of solutions for virtually every fluid power component.
Variations (9)
1/2XRL 4230T COOL 75
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 12.7 |
| Hose Outside Diameter (in) | 0.81 |
| Hose Outside Diameter (mm) | 20.6 |
| Inside Diameter (in) | 0.5 |
| Inside Diameter (mm) | 12.7 |
| Working Pressure (psi) | 63 |
| Length (m) | 213.3 |
| Outside Diameter (in) | 0.81 |
| Outside Diameter (mm) | 12.7 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 600 |
| Weight (lbs.) | 0.23 |
1XREEL 4230T COOL 75
| Vacuum (In. Hg) | 6 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 10 |
| Minimum Bend Radius (mm) | 254 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.34 |
| Hose Outside Diameter (mm) | 34 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 44 |
| Length (m) | 182.9 |
| Outside Diameter (in) | 1.34 |
| Outside Diameter (mm) | 25.4 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 600 |
| Weight (lbs.) | 0.4 |
3/4XCTN 4230T COOL 75
| Vacuum (In. Hg) | 7 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 191 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.06 |
| Hose Outside Diameter (mm) | 26.9 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 50 |
| Length (m) | 61 |
| Outside Diameter (in) | 1.06 |
| Outside Diameter (mm) | 19.1 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.29 |
3/8XCTN 4230T COOL 75
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 9.5 |
| Hose Outside Diameter (in) | 0.69 |
| Hose Outside Diameter (mm) | 17.5 |
| Inside Diameter (in) | 0.38 |
| Inside Diameter (mm) | 9.5 |
| Working Pressure (psi) | 63 |
| Length (m) | 152.4 |
| Outside Diameter (in) | 0.69 |
| Outside Diameter (mm) | 9.5 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 500 |
| Weight (lbs.) | 0.17 |
5/16XRL 4230T COOL 75
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 64 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 7.9 |
| Hose Outside Diameter (in) | 0.62 |
| Hose Outside Diameter (mm) | 15.7 |
| Inside Diameter (in) | 0.31 |
| Inside Diameter (mm) | 7.9 |
| Working Pressure (psi) | 63 |
| Length (m) | 213.3 |
| Outside Diameter (in) | 0.62 |
| Outside Diameter (mm) | 7.9 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 600 |
| Weight (lbs.) | 0.15 |
5/8XRL 4230T COOL 75
| Vacuum (In. Hg) | 8 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 7 |
| Minimum Bend Radius (mm) | 159 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.63 |
| Hose Inside Diameter (mm) | 15.9 |
| Hose Outside Diameter (in) | 0.94 |
| Hose Outside Diameter (mm) | 23.9 |
| Inside Diameter (in) | 0.63 |
| Inside Diameter (mm) | 15.9 |
| Working Pressure (psi) | 63 |
| Length (m) | 91.4 |
| Outside Diameter (in) | 0.94 |
| Outside Diameter (mm) | 15.9 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.25 |
12216-1
No variation attributes.
3/4XRL 1 4230T
No variation attributes.
42300181
No variation attributes.
Specifications
| Vacuum (In. Hg) | 6 – 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 3 – 10 |
| Minimum Bend Radius (mm) | 64 – 254 |
| Min. Burst Pressure (psi) | 300 |
| Hose Inside Diameter (in). | 0.31 – 1 |
| Hose Inside Diameter (mm) | 7.9 – 25.4 |
| Hose Outside Diameter (in) | 0.62 – 1.34 |
| Hose Outside Diameter (mm) | 15.7 – 34 |
| Inside Diameter (in) | 0.31 – 1 |
| Inside Diameter (mm) | 7.9 – 25.4 |
| Working Pressure (psi) | 44 – 63 |
| Length (m) | 61 – 213.3 |
| Outside Diameter (in) | 0.62 – 1.34 |
| Outside Diameter (mm) | 7.9 – 25.4 |
| Use | Fleet |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | EPDM - Type P. Limited oil resistance. |
| Construction: Cover | EPDM - Type P |
| Standards | Meets requirements of SAE 20R3 Class D2 (except durometer and compression set). |
| Standard Industry Specification | SAE 20R3 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Recommended For | Standard heater lines and small diameter coolant connections. |
| Customer Pack | 200 – 600 |
| Weight (lbs.) | 0.15 – 0.4 |
PDF Documents
No PDF documents.