Attributes
| Part Number | 4110-000000-000012 |
|---|
Description
Black Gold™ Oilfield Service 400D MegaTuff RECOMMENDED FOR: Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely light–weight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. CAUTION: Do not convey fuels over +120°F (+49°C). UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer. ARPM (Class A) High oil–resistant tube.
Variations (5)
3X100 BG OILFIELD SERV400D-MTF
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 22 |
| Minimum Bend Radius (mm) | 559 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.67 |
| Hose Outside Diameter (mm) | 93.2 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 400 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 3.67 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Ultra High Molecular Weight Polyethylene - Type L |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. |
| Caution | Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 1.51 |
3X200 BG OILFIELD SERV400D-MTF
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 22 |
| Minimum Bend Radius (mm) | 559 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.67 |
| Hose Outside Diameter (mm) | 93.2 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 400 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.67 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Ultra High Molecular Weight Polyethylene - Type L |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. |
| Caution | Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 1.51 |
4X100 BG OILFIELD SERV400D-MTF
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 30 |
| Minimum Bend Radius (mm) | 762 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.84 |
| Hose Outside Diameter (mm) | 122.9 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 400 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 4.84 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Ultra High Molecular Weight Polyethylene - Type L |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. |
| Caution | Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 3.17 |
4X200 BG OILFIELD SERV400D-MTF
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 30 |
| Minimum Bend Radius (mm) | 762 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.84 |
| Hose Outside Diameter (mm) | 122.9 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 400 |
| Length (m) | 61 |
| Outside Diameter (in) | 4.84 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Ultra High Molecular Weight Polyethylene - Type L |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. |
| Caution | Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 3.1 |
411011027
No variation attributes.
Specifications
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 22 – 30 |
| Minimum Bend Radius (mm) | 559 – 762 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 3 – 4 |
| Hose Inside Diameter (mm) | 76.2 – 101.6 |
| Hose Outside Diameter (in) | 3.67 – 4.84 |
| Hose Outside Diameter (mm) | 93.2 – 122.9 |
| Inside Diameter (in) | 3 – 4 |
| Inside Diameter (mm) | 76.2 – 101.6 |
| Working Pressure (psi) | 400 |
| Length (m) | 30.5 – 61 |
| Outside Diameter (in) | 3.67 – 4.84 |
| Outside Diameter (mm) | 76.2 – 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Ultra High Molecular Weight Polyethylene - Type L |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. |
| Caution | Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 100 – 200 |
| Weight (lbs.) | 1.51 – 3.17 |
PDF Documents
No PDF documents.