Attributes
| Part Number | 4688-000000-000000 |
|---|
Description
Black Gold™ Fuel RECOMMENDED FOR: Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. CAUTION: For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). ARPM (Class A) High oil–resistant tube. Multi-ply, synthetic textile, static filament reinforcement.
Features and Benefits Temperature Range: -40°C to +82°C (-40°F to +180°F) continuous service. Packaging: 200’ length coiled and wrapped in polyethylene. Branding: Continuous transfer label. Example: "Gates® Black Gold™ Fuel 300SD PSI (2.07MPa) WP Made in U.S.A."
Variations (16)
2-1/2X200 BG FUEL 300D
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 17 |
| Minimum Bend Radius (mm) | 432 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 2.5 |
| Hose Inside Diameter (mm) | 63.5 |
| Hose Outside Diameter (in) | 3.16 |
| Hose Outside Diameter (mm) | 80.3 |
| Inside Diameter (in) | 2.5 |
| Inside Diameter (mm) | 63.5 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.16 |
| Outside Diameter (mm) | 63.5 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 2.16 |
2X200 BG FUEL 300D
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 14 |
| Minimum Bend Radius (mm) | 356 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.66 |
| Hose Outside Diameter (mm) | 67.6 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.66 |
| Outside Diameter (mm) | 50.8 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 1.78 |
2X200 BG FUEL 300SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 10 |
| Minimum Bend Radius (mm) | 254 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.78 |
| Hose Outside Diameter (mm) | 70.6 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 2.78 |
| Outside Diameter (mm) | 50.8 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 1.6 |
3X200 BG FUEL 300D
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 21 |
| Minimum Bend Radius (mm) | 533 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.7 |
| Hose Outside Diameter (mm) | 94 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.7 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 2.45 |
3X200 BG FUEL 300SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.86 |
| Hose Outside Diameter (mm) | 98 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.86 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 2.59 |
4X200 BG FUEL 300D
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 18 |
| Minimum Bend Radius (mm) | 457 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.86 |
| Hose Outside Diameter (mm) | 98 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 3.86 |
| Outside Diameter (mm) | 76.2 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 2.59 |
4X200 BG FUEL 300SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 24 |
| Minimum Bend Radius (mm) | 610 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.87 |
| Hose Outside Diameter (mm) | 123.7 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 4.87 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 3.52 |
5X200 BG FUEL 300D
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 35 |
| Minimum Bend Radius (mm) | 889 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 5 |
| Hose Inside Diameter (mm) | 127 |
| Hose Outside Diameter (in) | 6.84 |
| Hose Outside Diameter (mm) | 173.7 |
| Inside Diameter (in) | 5 |
| Inside Diameter (mm) | 127 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 6.84 |
| Outside Diameter (mm) | 127 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 4.5 |
6X100 BG FUEL 300D
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 46 |
| Minimum Bend Radius (mm) | 1168 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 6 |
| Hose Inside Diameter (mm) | 152.4 |
| Hose Outside Diameter (in) | 6.84 |
| Hose Outside Diameter (mm) | 173.7 |
| Inside Diameter (in) | 6 |
| Inside Diameter (mm) | 152.4 |
| Working Pressure (psi) | 300 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 6.84 |
| Outside Diameter (mm) | 152.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 4.91 |
6X100 BG FUEL 300SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 36 |
| Minimum Bend Radius (mm) | 914 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 6 |
| Hose Inside Diameter (mm) | 152.4 |
| Hose Outside Diameter (in) | 7.07 |
| Hose Outside Diameter (mm) | 179.6 |
| Inside Diameter (in) | 6 |
| Inside Diameter (mm) | 152.4 |
| Working Pressure (psi) | 300 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 7.07 |
| Outside Diameter (mm) | 152.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 100 |
| Weight (lbs.) | 5.0 |
6X200 BG FUEL 300D
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 46 |
| Minimum Bend Radius (mm) | 1168 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 6 |
| Hose Inside Diameter (mm) | 152.4 |
| Hose Outside Diameter (in) | 6.84 |
| Hose Outside Diameter (mm) | 173.7 |
| Inside Diameter (in) | 6 |
| Inside Diameter (mm) | 152.4 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 6.84 |
| Outside Diameter (mm) | 152.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 4.91 |
6X200 BG FUEL 300SD
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 36 |
| Minimum Bend Radius (mm) | 914 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 6 |
| Hose Inside Diameter (mm) | 152.4 |
| Hose Outside Diameter (in) | 7.07 |
| Hose Outside Diameter (mm) | 179.6 |
| Inside Diameter (in) | 6 |
| Inside Diameter (mm) | 152.4 |
| Working Pressure (psi) | 300 |
| Length (m) | 61 |
| Outside Diameter (in) | 7.07 |
| Outside Diameter (mm) | 152.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 6.67 |
32BG5000
| Vacuum (In. Hg) | 10 |
|---|---|
| Minimum Bend Radius (in) | 14 |
| Minimum Bend Radius (mm) | 356 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Working Pressure (psi) | 300 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 2.66 |
| Outside Diameter (mm) | 50.8 |
| Coupling Recommendation | 71 Permanent Swaged or Crimped |
| Color | Black |
| Cover | Chloroprene - Type A. Smooth. |
| Reinforcement | Multi-ply, synthetic textile, static filament |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, static filament |
| Construction: Tube | Nitrile - Type C. Black. High oil resistance |
| Standards: Cover | ARPM Class A |
411007077
No variation attributes.
411007047
No variation attributes.
411007106
No variation attributes.
Specifications
| Vacuum (In. Hg) | 10 – 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 10 – 46 |
| Minimum Bend Radius (mm) | 254 – 1168 |
| Min. Burst Pressure (psi) | 1200 |
| Hose Inside Diameter (in). | 2 – 6 |
| Hose Inside Diameter (mm) | 50.8 – 152.4 |
| Hose Outside Diameter (in) | 2.66 – 7.07 |
| Hose Outside Diameter (mm) | 67.6 – 179.6 |
| Inside Diameter (in) | 2 – 6 |
| Inside Diameter (mm) | 50.8 – 152.4 |
| Working Pressure (psi) | 300 |
| Length (m) | 30.5 – 61 |
| Outside Diameter (in) | 2.66 – 7.07 |
| Outside Diameter (mm) | 50.8 – 152.4 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament, Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking., Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. |
| Caution | For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 100 – 200 |
| Weight (lbs.) | 1.6 – 6.67 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Coupling Recommendation | 71 Permanent Swaged or Crimped |
| Cover | Chloroprene - Type A. Smooth. |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, static filament |
| Construction: Tube | Nitrile - Type C. Black. High oil resistance |
| Standards: Cover | ARPM Class A |
PDF Documents
No PDF documents.