Attributes
| Part Number | 3220-000000-000000 |
|---|
Description
LP350X RECOMMENDED FOR: Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744–5070 for inspection and assembly testing information. Warning: Do not convey LP Gas over +140°F (60°C). CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744–5070 for inspection and assembly testing information. Meets standards: UL No. 21, CAN/CGA-8.1-M86, NFPA 58 Section 8-3.5. Design Factor: 5:1
Variations (8)
24FM7000
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 12 |
| Minimum Bend Radius (mm) | 305 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 1.5 |
| Hose Inside Diameter (mm) | 38.1 |
| Hose Outside Diameter (in) | 2.25 |
| Hose Outside Diameter (mm) | 57.2 |
| Inside Diameter (in) | 1.5 |
| Inside Diameter (mm) | 38.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 18.3 |
| Outside Diameter (in) | 2.25 |
| Outside Diameter (mm) | 38.1 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 3-braid, textile |
| Tube | Chloroprene - Type A. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 60 |
| Weight (lbs.) | 1.26 |
1/4XRL FUEL MASTER LPG VAPOR 125 / 4FM8000
| Includes Switch Port | false |
|---|---|
| Vacuum (In. Hg) | 30 |
| Continuous Operating Temperature Range | -30°F to +150°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 625 |
| Hose Inside Diameter (in) | 0.25 |
| Hose Inside Diameter (mm) | 6.4 |
| Hose Outside Diameter (in) | 0.53 |
| Hose Outside Diameter (mm) | 13.5 |
| Max. Working Pressure | 125 |
| Max. Working Pressure (Bar) | 8.6 |
| Working Pressure (psi) | 125 |
| Length (m) | 213.3 |
| Use | Industrial Hose |
| Color | Black |
| Construction: Cover | Type A (Chloroprene). Black. |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | High tensile synthetic textile cord. |
| Construction: Tube | Type C (Nitrile). Black. |
| Standards | Underwriters Laboratories Standard No. 569. (Applies to hose assemblies only). |
| Recommended For | Flexible connector for conveying low-pressure LPG (vapor only) to many types of farm and industrial heating applications; e.g. space heaters. |
| Caution | This hose should not be used for liquid LPG or in UL approved appliances such as barbecue grills. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.11 |
32FM7001
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 14 |
| Minimum Bend Radius (mm) | 356 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.86 |
| Hose Outside Diameter (mm) | 72.6 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 350 |
| Length (m) | 18.3 |
| Outside Diameter (in) | 2.86 |
| Outside Diameter (mm) | 50.8 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 3-braid, textile |
| Tube | Chloroprene - Type A. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 60 |
| Weight (lbs.) | 1.81 |
3/16XRL FUEL MASTER LPG VAPOR 125 / 3FM8000
| Includes Switch Port | false |
|---|---|
| Vacuum (In. Hg) | 30 |
| Continuous Operating Temperature Range | -30°F to +150°F |
| Minimum Bend Radius (in) | 2 |
| Minimum Bend Radius (mm) | 51 |
| Min. Burst Pressure (psi) | 625 |
| Hose Inside Diameter (in) | 0.19 |
| Hose Inside Diameter (mm) | 4.8 |
| Hose Outside Diameter (in) | 0.44 |
| Hose Outside Diameter (mm) | 11.2 |
| Max. Working Pressure | 125 |
| Max. Working Pressure (Bar) | 8.6 |
| Working Pressure (psi) | 125 |
| Length (m) | 213.3 |
| Use | Industrial Hose |
| Color | Black |
| Construction: Cover | Type A (Chloroprene). Black. |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | High tensile synthetic textile cord. |
| Construction: Tube | Type C (Nitrile). Black. |
| Standards | Underwriters Laboratories Standard No. 569. (Applies to hose assemblies only). |
| Recommended For | Flexible connector for conveying low-pressure LPG (vapor only) to many types of farm and industrial heating applications; e.g. space heaters. |
| Caution | This hose should not be used for liquid LPG or in UL approved appliances such as barbecue grills. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.08 |
48FM7000
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 24 |
| Minimum Bend Radius (mm) | 610 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 3 |
| Hose Inside Diameter (mm) | 76.2 |
| Hose Outside Diameter (in) | 3.88 |
| Hose Outside Diameter (mm) | 98.6 |
| Inside Diameter (in) | 3 |
| Inside Diameter (mm) | 76.2 |
| Working Pressure (psi) | 350 |
| Length (m) | 18.3 |
| Outside Diameter (in) | 3.88 |
| Outside Diameter (mm) | 76.2 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 3-braid, textile |
| Tube | Chloroprene - Type A. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 60 |
| Weight (lbs.) | 2.58 |
4LP350X X50FT / 4FM7002
| Includes Switch Port | false |
|---|---|
| Vacuum (In. Hg) | 30 |
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in) | 0.25 |
| Hose Inside Diameter (mm) | 6.4 |
| Hose Outside Diameter (in) | 0.58 |
| Hose Outside Diameter (mm) | 14.7 |
| Max. Working Pressure | 350 |
| Max. Working Pressure (Bar) | 24.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 15.2 |
| Use | Industrial Hose |
| Color | Black |
| Notes | Application Note: No LP350 hose assemblies 60" or longer allowed per UL requirement. |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures up to 350 psi rated working pressure. Can be used for natural gas under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). Not recommended for residential or office buildings. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. Meets UL Standard #21, CAN/CGA-8.1-M86, NFPA 58, Section 8-3, 5. |
| Customer Pack | 1 |
| Weight (lbs.) | 6.43 |
6LP350X X50FT / 6FM7002
| Includes Switch Port | false |
|---|---|
| Vacuum (In. Hg) | 30 |
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in) | 0.38 |
| Hose Inside Diameter (mm) | 9.5 |
| Hose Outside Diameter (in) | 0.7 |
| Hose Outside Diameter (mm) | 18.8 |
| Max. Working Pressure | 350 |
| Max. Working Pressure (Bar) | 24.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 15.2 |
| Use | Industrial Hose |
| Color | Black |
| Notes | Application Note: No LP350 hose assemblies 60" or longer allowed per UL requirement. |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures up to 350 psi rated working pressure. Can be used for natural gas under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). Not recommended for residential or office buildings. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. Meets UL Standard #21, CAN/CGA-8.1-M86, NFPA 58, Section 8-3, 5. |
| Customer Pack | 1 |
| Weight (lbs.) | 8.84 |
8LP350X X50FT / 8FM7001
| Includes Switch Port | false |
|---|---|
| Vacuum (In. Hg) | 25 |
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in) | 0.5 |
| Hose Inside Diameter (mm) | 12.7 |
| Hose Outside Diameter (in) | 0.91 |
| Hose Outside Diameter (mm) | 23.1 |
| Max. Working Pressure | 350 |
| Max. Working Pressure (Bar) | 24.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 15.2 |
| Use | Industrial Hose |
| Color | Black |
| Notes | Application Note: No LP350 hose assemblies 60" or longer allowed per UL requirement. |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures up to 350 psi rated working pressure. Can be used for natural gas under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). Not recommended for residential or office buildings. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. Meets UL Standard #21, CAN/CGA-8.1-M86, NFPA 58, Section 8-3, 5. |
| Customer Pack | 1 |
| Weight (lbs.) | 11.66 |
Specifications
| Vacuum (In. Hg) | 10 – 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F, -30°F to +150°F |
| Minimum Bend Radius (in) | 2 – 24 |
| Minimum Bend Radius (mm) | 51 – 610 |
| Min. Burst Pressure (psi) | 625 – 1750 |
| Hose Inside Diameter (in). | 1.5 – 3 |
| Hose Inside Diameter (mm) | 4.8 – 76.2 |
| Hose Outside Diameter (in) | 0.44 – 3.88 |
| Hose Outside Diameter (mm) | 11.2 – 98.6 |
| Inside Diameter (in) | 1.5 – 3 |
| Inside Diameter (mm) | 38.1 – 76.2 |
| Working Pressure (psi) | 125 – 350 |
| Length (m) | 15.2 – 213.3 |
| Outside Diameter (in) | 2.25 – 3.88 |
| Outside Diameter (mm) | 38.1 – 76.2 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 3-braid, textile |
| Tube | Chloroprene - Type A. High oil resistance. |
| Construction: Cover | Chloroprene - Type A, Type A (Chloroprene). Black. |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes)., Underwriters Laboratories Standard No. 569. (Applies to hose assemblies only). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit)., Flexible connector for conveying low-pressure LPG (vapor only) to many types of farm and industrial heating applications; e.g. space heaters., Liquid or gaseous propane, butane or any combination of these two mixtures up to 350 psi rated working pressure. Can be used for natural gas under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). Not recommended for residential or office buildings. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. Meets UL Standard #21, CAN/CGA-8.1-M86, NFPA 58, Section 8-3, 5. |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information., This hose should not be used for liquid LPG or in UL approved appliances such as barbecue grills. |
| Customer Pack | 1 – 700 |
| Weight (lbs.) | 0.08 – 11.66 |
| Includes Switch Port | false |
| Hose Inside Diameter (in) | 0.19 – 0.5 |
| Max. Working Pressure | 125 – 350 |
| Max. Working Pressure (Bar) | 8.6 – 24.1 |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | High tensile synthetic textile cord. |
| Construction: Tube | Type C (Nitrile). Black. |
| Notes | Application Note: No LP350 hose assemblies 60" or longer allowed per UL requirement. |
PDF Documents
No PDF documents.