Attributes
| Part Number | 4219-000000-000011 |
|---|
Description
Standard Fuel and Oil Hose RECOMMENDED FOR: Fuel line from tank to engine. Also suitable for low pressure hydraulic oil, engine oil, tank vent, crank case vent, or coolant bottle. Not for in-tank, gaseous fuels, or biodiesel above 20% (B20) at 51°C. CAUTION: Not recommended for fuel injection systems. Not for in–tank, gaseous fuels, or biol–diesel applications above B5 bio–diesel (80°C /176°F). Oil, gasoline and ethanol resistant tube. Fuel, oil, ozone and high temperature resistant cover. Exceeds requirements of SAE 30R6 and SAE 30R7. ARPM (Class A) High oil–resistant tube.
OE QUALITY FOR THE AFTERMARKET. Our long-standing partnerships with automotive OEMs on production vehicles enable us to produce aftermarket parts of superior quality, durability, and performance. That experience goes into every Gates® aftermarket engine hose and accessory, bringing a range of solutions for virtually every fluid power component.
Features and Benefits Reinforced with a synthetic fiber reinforcement. Nitrile Tube and Modified Nitrile Cover. Working pressure: 0,3 to 0,2 MPa. Design factor: 6:1. Size: 3/16" to 3/4". Crimped fittings available. Shipped Bulk on Reels (Max. 5 pieces). Custom lengths available with minimum order quantity.
GATES GETS YOUR VEHICLES BACK ON THE ROAD. AND KEEPS THEM THERE. Gates® develops our automotive aftermarket parts in partnership with the top OEMs around the world, so you can trust premium-grade automotive engine parts that are built to last.
Variations (8)
1/2XRL 4219G FUEL LINE 35
| Dynamic WP (Max.psi) (1) | 35 |
|---|---|
| Vacuum (In. Hg) | 10 |
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 175 |
| Hose Inside Diameter (in). | 0.78 |
| Hose Inside Diameter (mm) | 19.8 |
| Hose Outside Diameter (in) | 0.78 |
| Hose Outside Diameter (mm) | 19.8 |
| Inside Diameter (in) | 0.5 |
| Inside Diameter (mm) | 12.7 |
| Max. Working Pressure | 35 |
| Max. Working Pressure (Bar) | 2 |
| Working Pressure (psi) | 35 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.78 |
| Outside Diameter (mm) | 12.7 |
| Markets/Applications | Fuel |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.268 |
1/4XRL 4219G FUEL LINE 50
| Dynamic WP (Max.psi) (1) | 50 |
|---|---|
| Vacuum (In. Hg) | 24 |
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 250 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 12.7 |
| Hose Outside Diameter (in) | 0.5 |
| Hose Outside Diameter (mm) | 12.7 |
| Inside Diameter (in) | 0.25 |
| Inside Diameter (mm) | 6.4 |
| Max. Working Pressure | 50 |
| Max. Working Pressure (Bar) | 3 |
| Working Pressure (psi) | 50 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.5 |
| Outside Diameter (mm) | 6.4 |
| Markets/Applications | Fuel |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.137 |
3EH5600
| Vacuum (In. Hg) | 24 |
|---|---|
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Inside Diameter (in) | 0.19 |
| Inside Diameter (mm) | 4.8 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 50 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.41 |
| Outside Diameter (mm) | 4.8 |
| Color | Black |
| Cover | Modified Nitrile - Type C2. Smooth. |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Synthetic textile |
| Construction: Tube | Nitrile - Type C. Black. Ethanol, Gasoline, Oil Resistant |
| Standards: Tube | ARPM Class A |
3/4XCTN 4219G FUEL LINE 35
| Vacuum (In. Hg) | 10 |
|---|---|
| Minimum Bend Radius (in) | 7 |
| Minimum Bend Radius (mm) | 178 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 35 |
| Length (m) | 61 |
| Outside Diameter (in) | 1.13 |
| Outside Diameter (mm) | 19.1 |
| Color | Black |
| Cover | Modified Nitrile - Type C2. Smooth. |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Synthetic textile |
| Construction: Tube | Nitrile - Type C. Black. Ethanol, Gasoline, Oil Resistant |
| Standards: Tube | ARPM Class A |
3/8XRL 4219G FUEL LINE 50
| Vacuum (In. Hg) | 24 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 4 |
| Minimum Bend Radius (mm) | 102 |
| Min. Burst Pressure (psi) | 250 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 9.5 |
| Hose Outside Diameter (in) | 0.62 |
| Hose Outside Diameter (mm) | 15.7 |
| Inside Diameter (in) | 0.38 |
| Inside Diameter (mm) | 9.5 |
| Working Pressure (psi) | 50 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.62 |
| Outside Diameter (mm) | 9.5 |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.1546 |
5/16XRL 4219G FUEL LINE 50
| Vacuum (In. Hg) | 24 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 250 |
| Hose Inside Diameter (in). | 0.31 |
| Hose Inside Diameter (mm) | 7.9 |
| Hose Outside Diameter (in) | 0.56 |
| Hose Outside Diameter (mm) | 14.2 |
| Inside Diameter (in) | 0.31 |
| Inside Diameter (mm) | 7.9 |
| Working Pressure (psi) | 50 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.56 |
| Outside Diameter (mm) | 7.9 |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.115 |
5/32XRL 4219G FUEL LINE 50
| Dynamic WP (Max.psi) (1) | 50 |
|---|---|
| Vacuum (In. Hg) | 24 |
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 2 |
| Minimum Bend Radius (mm) | 51 |
| Min. Burst Pressure (psi) | 250 |
| Hose Inside Diameter (in). | 0.35 |
| Hose Inside Diameter (mm) | 8.9 |
| Hose Outside Diameter (in) | 0.35 |
| Hose Outside Diameter (mm) | 8.9 |
| Inside Diameter (in) | 0.16 |
| Inside Diameter (mm) | 4 |
| Max. Working Pressure | 50 |
| Max. Working Pressure (Bar) | 3 |
| Working Pressure (psi) | 50 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.36 |
| Outside Diameter (mm) | 4 |
| Markets/Applications | Fuel |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.09 |
5/8XRL 4219G FUEL LINE 35
| Dynamic WP (Max.psi) (1) | 35 |
|---|---|
| Vacuum (In. Hg) | 10 |
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 175 |
| Hose Inside Diameter (in). | 0.94 |
| Hose Inside Diameter (mm) | 23.9 |
| Hose Outside Diameter (in) | 0.94 |
| Hose Outside Diameter (mm) | 23.9 |
| Inside Diameter (in) | 0.63 |
| Inside Diameter (mm) | 15.9 |
| Max. Working Pressure | 35 |
| Max. Working Pressure (Bar) | 2 |
| Working Pressure (psi) | 35 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.94 |
| Outside Diameter (mm) | 15.9 |
| Markets/Applications | Fuel |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.352 |
Specifications
| Dynamic WP (Max.psi) (1) | 35 – 50 |
|---|---|
| Vacuum (In. Hg) | 10 – 24 |
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 2 – 7 |
| Minimum Bend Radius (mm) | 51 – 178 |
| Min. Burst Pressure (psi) | 175 – 250 |
| Hose Inside Diameter (in). | 0.31 – 0.94 |
| Hose Inside Diameter (mm) | 7.9 – 23.9 |
| Hose Outside Diameter (in) | 0.35 – 0.94 |
| Hose Outside Diameter (mm) | 8.9 – 23.9 |
| Inside Diameter (in) | 0.16 – 0.75 |
| Inside Diameter (mm) | 4 – 19.1 |
| Max. Working Pressure | 35 – 50 |
| Max. Working Pressure (Bar) | 2 – 3 |
| Working Pressure (psi) | 35 – 50 |
| Length (m) | 61 – 167.6 |
| Outside Diameter (in) | 0.36 – 1.13 |
| Outside Diameter (mm) | 4 – 19.1 |
| Markets/Applications | Fuel |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | Nitrile - Type C. Ethanol, Gasoline, Oil Resistant. |
| Construction: Cover | Modified Nitrile - Type C2 |
| Standards | Exceeds requirements of SAE 30R6 and SAE 30R7. |
| Standard Industry Specification | SAE 30R6, SAE 30R7 |
| Meets These Agency Specifications | SAE - Society of Automotive Engineers |
| Standards: Tube | ARPM Class A |
| Recommended For | Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. |
| Caution | Not recommended for fuel injection systems. |
| Customer Pack | 550 |
| Weight (lbs.) | 0.09 – 0.352 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Cover | Modified Nitrile - Type C2. Smooth. |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Synthetic textile |
| Construction: Tube | Nitrile - Type C. Black. Ethanol, Gasoline, Oil Resistant |
PDF Documents
No PDF documents.