Attributes
| Part Number | 3220-000000-000001 |
|---|
Description
Fuel Master™ LP 350 Hose RECOMMENDED FOR: Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744–5070 for inspection and assembly testing information. Warning: Do not convey LP Gas over +140°F (60°C). CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744–5070 for inspection and assembly testing information. Meets standards: UL No. 21, CAN/CGA-8.1-M86, NFPA 58 Section 8-3.5. Design Factor: 5:1
Variations (20)
1-1/4XRL FUEL LP350
| Vacuum (In. Hg) | 10 |
|---|---|
| Minimum Bend Radius (in) | 10 |
| Minimum Bend Radius (mm) | 254 |
| Inside Diameter (in) | 1.25 |
| Inside Diameter (mm) | 31.8 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Working Pressure (psi) | 350 |
| Length (m) | 91.4 |
| Outside Diameter (in) | 1.85 |
| Outside Diameter (mm) | 31.8 |
| Coupling Recommendation | GLX® Couplings [G44 Series] |
| Color | Black |
| Cover | Chloroprene - Type A. Perforated. |
| Reinforcement | 3-braid, textile |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | 3-braid, textile |
| Construction: Tube | Nitrile - Type C. Black. High oil resistance |
8FM7000
| Vacuum (In. Hg) | 25 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 5 |
| Minimum Bend Radius (mm) | 127 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.5 |
| Hose Inside Diameter (mm) | 12.7 |
| Hose Outside Diameter (in) | 0.91 |
| Hose Outside Diameter (mm) | 23.1 |
| Inside Diameter (in) | 0.5 |
| Inside Diameter (mm) | 12.7 |
| Working Pressure (psi) | 350 |
| Length (m) | 213.3 |
| Outside Diameter (in) | 0.91 |
| Outside Diameter (mm) | 12.7 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.28 |
4FM7000
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6.4 |
| Hose Outside Diameter (in) | 0.58 |
| Hose Outside Diameter (mm) | 14.7 |
| Inside Diameter (in) | 0.25 |
| Inside Diameter (mm) | 6.4 |
| Working Pressure (psi) | 350 |
| Length (m) | 1127.7 |
| Outside Diameter (in) | 0.58 |
| Outside Diameter (mm) | 6.4 |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 3700 |
| Weight (lbs.) | 0.14 |
4FM7001
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Hose Inside Diameter (in). | 0.25 |
| Hose Inside Diameter (mm) | 6.4 |
| Hose Outside Diameter (in) | 0.58 |
| Hose Outside Diameter (mm) | 14.7 |
| Inside Diameter (in) | 0.25 |
| Inside Diameter (mm) | 6.4 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Working Pressure (psi) | 350 |
| Length (m) | 213.3 |
| Outside Diameter (in) | 0.58 |
| Outside Diameter (mm) | 6.4 |
| Coupling Recommendation | GLX® Couplings [G44 Series] |
| Use | Industrial Hose |
| Color | Black |
| Cover | Chloroprene - Type A. Perforated. |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | 4-spiral, fiber |
| Construction: Tube | Nitrile - Type C. Black. High oil resistance |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.14 |
16FM7000
| Vacuum (In. Hg) | 15 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.51 |
| Hose Outside Diameter (mm) | 38.4 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 350 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.51 |
| Outside Diameter (mm) | 25.4 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.66 |
16FM7001
| Vacuum (In. Hg) | 15 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.51 |
| Hose Outside Diameter (mm) | 38.4 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 350 |
| Length (m) | 38.1 |
| Outside Diameter (in) | 1.51 |
| Outside Diameter (mm) | 25.4 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 125 |
| Weight (lbs.) | 0.6 |
16FM7002
| Vacuum (In. Hg) | 15 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.51 |
| Hose Outside Diameter (mm) | 38.4 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 350 |
| Length (m) | 45.7 |
| Outside Diameter (in) | 1.51 |
| Outside Diameter (mm) | 25.4 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 150 |
| Weight (lbs.) | 0.6 |
16FM7003
| Vacuum (In. Hg) | 15 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 15 |
| Minimum Bend Radius (mm) | 381 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.51 |
| Hose Outside Diameter (mm) | 38.4 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 350 |
| Length (m) | 61 |
| Outside Diameter (in) | 1.51 |
| Outside Diameter (mm) | 25.4 |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 200 |
| Weight (lbs.) | 0.63 |
16FM7004
| Vacuum (In. Hg) | 15 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 8 |
| Minimum Bend Radius (mm) | 203 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Hose Outside Diameter (in) | 1.51 |
| Hose Outside Diameter (mm) | 38.4 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| Working Pressure (psi) | 350 |
| Length (m) | 106.7 |
| Outside Diameter (in) | 1.51 |
| Outside Diameter (mm) | 25.4 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 300 |
| Weight (lbs.) | 0.6 |
2X50 FUEL LP350
| Vacuum (In. Hg) | 10 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 14 |
| Minimum Bend Radius (mm) | 356 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 2 |
| Hose Inside Diameter (mm) | 50.8 |
| Hose Outside Diameter (in) | 2.86 |
| Hose Outside Diameter (mm) | 72.6 |
| Inside Diameter (in) | 2 |
| Inside Diameter (mm) | 50.8 |
| Working Pressure (psi) | 350 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.86 |
| Outside Diameter (mm) | 50.8 |
| Color | Black |
| Reinforcement | 3-braid, textile |
| Tube | Chloroprene - Type A. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.84 |
12FM7000
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.23 |
| Hose Outside Diameter (mm) | 31.2 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 30.5 |
| Outside Diameter (in) | 1.23 |
| Outside Diameter (mm) | 19.1 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 100 |
| Weight (lbs.) | 0.44 |
12FM7001
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.23 |
| Hose Outside Diameter (mm) | 31.2 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 45.7 |
| Outside Diameter (in) | 1.23 |
| Outside Diameter (mm) | 19.1 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 150 |
| Weight (lbs.) | 0.44 |
12FM7002
| Vacuum (In. Hg) | 20 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 6 |
| Minimum Bend Radius (mm) | 152 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.75 |
| Hose Inside Diameter (mm) | 19.1 |
| Hose Outside Diameter (in) | 1.23 |
| Hose Outside Diameter (mm) | 31.2 |
| Inside Diameter (in) | 0.75 |
| Inside Diameter (mm) | 19.1 |
| Working Pressure (psi) | 350 |
| Length (m) | 106.7 |
| Outside Diameter (in) | 1.23 |
| Outside Diameter (mm) | 19.1 |
| Use | Industrial Hose |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 350 |
| Weight (lbs.) | 0.44 |
6FM7000
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 9.5 |
| Hose Outside Diameter (in) | 0.74 |
| Hose Outside Diameter (mm) | 18.8 |
| Inside Diameter (in) | 0.38 |
| Inside Diameter (mm) | 9.5 |
| Working Pressure (psi) | 350 |
| Length (m) | 609.6 |
| Outside Diameter (in) | 0.74 |
| Outside Diameter (mm) | 9.5 |
| Color | Black |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 2000 |
| Weight (lbs.) | 0.21 |
6FM7001
| Vacuum (In. Hg) | 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 9.5 |
| Hose Outside Diameter (in) | 0.74 |
| Hose Outside Diameter (mm) | 18.8 |
| Inside Diameter (in) | 0.38 |
| Inside Diameter (mm) | 9.5 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Working Pressure (psi) | 350 |
| Length (m) | 213.3 |
| Outside Diameter (in) | 0.74 |
| Outside Diameter (mm) | 9.5 |
| Coupling Recommendation | GLX® Couplings [G44 Series] |
| Use | Industrial Hose |
| Color | Black |
| Cover | Chloroprene - Type A. Perforated. |
| Reinforcement | 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | 4-spiral, fiber |
| Construction: Tube | Nitrile - Type C. Black. High oil resistance |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 700 |
| Weight (lbs.) | 0.21 |
4FM7000
No variation attributes.
6FM7000
No variation attributes.
32210092
No variation attributes.
32203206
No variation attributes.
32201501
No variation attributes.
Specifications
| Vacuum (In. Hg) | 10 – 30 |
|---|---|
| Minimum Bend Radius (in) | 3 – 15 |
| Minimum Bend Radius (mm) | 76 – 381 |
| Inside Diameter (in) | 0.25 – 2 |
| Inside Diameter (mm) | 6.4 – 50.8 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Working Pressure (psi) | 350 |
| Length (m) | 15.2 – 1127.7 |
| Outside Diameter (in) | 0.58 – 2.86 |
| Outside Diameter (mm) | 6.4 – 50.8 |
| Coupling Recommendation | GLX® Couplings [G44 Series] |
| Color | Black |
| Cover | Chloroprene - Type A. Perforated. |
| Reinforcement | 3-braid, textile, 4-spiral, fiber |
| Tube | Nitrile - Type C. High oil resistance., Chloroprene - Type A. High oil resistance. |
| Construction: Cover | Chloroprene - Type A |
| Construction: Design Factor | 5:1 |
| Construction: Reinforcement | 3-braid, textile, 4-spiral, fiber |
| Construction: Tube | Nitrile - Type C. Black. High oil resistance |
| Continuous Operating Temperature Range | -40°F to +180°F |
| Min. Burst Pressure (psi) | 1750 |
| Hose Inside Diameter (in). | 0.25 – 2 |
| Hose Inside Diameter (mm) | 6.4 – 50.8 |
| Hose Outside Diameter (in) | 0.58 – 2.86 |
| Hose Outside Diameter (mm) | 14.7 – 72.6 |
| Use | Industrial Hose |
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Caution | Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information. |
| Customer Pack | 50 – 3700 |
| Weight (lbs.) | 0.14 – 1.84 |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
PDF Documents
No PDF documents.