Gates Product Browser
522Total
522Scraped
0Pending
20 matching products
Clear
Alternator Decoupler Pulley Tool - H10
Customer Pack: 1 Weight (lbs.): 0.17
Alternator Decoupler Pulley Tool - H10 Adapter
Customer Pack: 1 Weight (lbs.): 0.1
Alternator Decoupler Pulley Tool – T50
Customer Pack: 1 Weight (lbs.): 0.28
Alternator Decoupler Pulley Tool- H22 x 33T
Customer Pack: 1 Weight (lbs.): 0.12
Water Pump Spanner Wrench
Notes: Fits several Gates water pump covering many Chrysler and GM applications. Gates 2 1/2" spanner wrench adapts to a 3/8" ratchet or breaker bar to make water pump removal faster and easier. Let's the technician get a firm grip on the water pump to remove the clutch without scratching or galling the pulley. Customer Pack: 1 Weight (lbs.): 0.07
Belt Grabbing Telescopic Pole
Notes: 4' pole, extends to 11'. Allows easy product hanging and retrieval from belt boards that are installed high on walls. Extra-long 8" hook for extended reaches. Customer Pack: 1 Weight (lbs.): 2.3
Belt Install and Rotate Device
Notes: Minimizes finger and hand injuries due to hands getting caught in pinch points during routine installation and maintenance. While a drive is shut down and locked out, the BlRD safely facilitates rotational inspection of a drive. Customer Pack: 1 Weight (lbs.): 12.25
3/8 X 1/16 Disk Magnet
Use With: 212 Inductive Sensor Notes: Replacement Magnets for Inductive Sensor. Customer Pack: 10
Five Barrel Tension Tester
Notes: Five Barrel Tension Tester - Maximum deflection force: 165 lbs. For use with multiple V-belts and large synchronous belts. Customer Pack: 1 Weight (lbs.): 1.0
Belt Installation and Maintenance Tool Box
Notes: Belt Installation and Maintenance Tool Box. Customer Pack: 1 Weight (lbs.): 2.5
Double Barrel Tension Tester
Notes: Double Barrel Tension Tester - Maximum deflection force: 66 lbs. For use with all multiple V-belts and large synchronous belts. Customer Pack: 1 Weight (lbs.): 0.4
Cord Sensor
Length (mm): 1000 Use With: 550C Sonic Tension Meter Notes: Cord Sensor.
Flat Flexible Sensor
Length (mm): 170 Use With: 550C Sonic Tension Meter Notes: Flat Flexible Sensor.
DriveAlign™ Laser Alignment Tool
Customer Pack: 999 Weight (lbs.): 1.0
Stretch Fit™ Installation Tools
Customer Pack: 1 – 999 Weight (lbs.): 0.11 – 3.669 Notes: Installation instructions online. Installation tool for Gates Stretch Fit® belts. The belt can be damaged if the right tools are not used.
Subaru Stretch Fit Belt Tool
Notes: The 2008-11 Subaru Impreza, Forester and Outback with 2.5L engines utilize Stretch Fit® belt technology on the A/C compressor drives. Gates leads the way as the only U.S. aftermarket supplier to offer coverage for these vehicles. This tool is required for proper installation to avoid damaging the belt. Unlike the OE belt, this tool is available separately so that the technician isn’t forced to buy a tool every time a belt is installed. Customer Pack: 999 Weight (lbs.): 0.2
Sure Fit Tool
Customer Pack: 1 Weight (lbs.): 1.06 Packaging: Bulk
Locknuts for Bulkhead Fittings
H1 Stem Hex (in): 0.75 – 1.63 H1 Stem Hex (mm): 19.1 – 41.3 End 1 Diameter (mm): 5 – 16
Serpentine Belt Installation Tool
Notes: Dual-pin design affords convenient belt push/pull capability. Time-saving tool affords improved control and reach when installing serpentine belts. Also helps install V-belts and timing belts located in difficult-to-reach areas. Tool's handle lends easy twisting control of belt in hard-to-reach places. Customer Pack: 1 Weight (lbs.): 0.46